Description

3.7V To 12V Mini DC-DC Boost Module

Supports 5V/8V/9V/12V Output

Product Introduction:

The power supply module can be directly mounted on the printed circuit board. and other digital or analog loads to provide power. Typically, such modules are called point-of-load (pol) power supply systems or point-of-use power supply systems (pups).

Basic Parameters:

The output voltage can be set to 5V/8V/12V, the default is 12V

Input voltage range: 2.5V~VOUT. The input voltage must be lower than the set output voltage

Output capability:

When input by 3.7V lithium battery, it can output 5V1A, 8V0.5A, 9V0.45A, 12V0.3A

When input at 5V, it can output 8V0.7A, 9V0.7A, 9V0.45A, 12V0.5A

When the default 12V output, the LED indicator consumes about 1mA of current

If the indicator light is turned off, the input current is 1mA at no load

Voltage Settings:

The words A and B can be seen on the front of the PCB. Use a circuit soldering iron to change the on-off of the pad next to the character to change the output voltage, and the pad of the LED indicator can also be disconnected to turn off the indicator.