About Receiver:

 Model No.: AK-RK04SE-220

Channel: 4 CH

Frequency:315MHZ or 433.92MHZ

Operating Voltage:AC85V-260V

Coding Type: learning code

Maximum Working Current: 10A

Output Mode: Without voltage output(also called Contact output)

Step-down approach: resistance-capacitance(RC)

size: 107*48*21mm

About Working way/ output Way:

It is adjusted by the Jumper on the Receiver Board

Jumper  non : Momentary/ Jog--Press and hold -> On; Release -> Off.

Jumper on 1&2 :Toggle/ Self-lock--Press -> On; Press again -> Off·

Jumper on 2&3 : Latched/ Interlock--Press -> On; Press other button -> Off.

About Learning and clearing Method:

Learning:

Input 220V for the receiver .LED indicator ON .Press the learning button,  The indicator OFF, then please press any buttons of the remote control , The indicator will flash  3 times,It means successfully studied.

Clearning:

Hold press learning button about 8 seconds,,indicator from OFF to ON,then press remote ,receiver did not work ,it means clearning code successful.

 Transmitting Distance: 20-500m(please notice that is the ideal distance without any block and signal interfere , it would rise and fall about 10%-90% with the block and signal interference ).

433mhz and 315 mhz are available ,315mhz will be sent out if there is no demand on frequency

A:

1x Receiver(with cover)