Description

Specifications:

Control Lights, TVs, Motors, Fans, Cameras, Video signals, Audio signals, electrically operated Doors/ Locks/ Windows.

1.Transmitter

Channel: 18 CH

Remote Control Distance:0-200 M 

Encode: Fixed code, soldering

Frequency:315 or 433.92 mhz

Size: 130mm x 52mm x 13mm

Power Supply: 1 X 12V/23A (NOT included)

2.Control Mode

1)Toggle/Self-Lock: (Press Button 1 to learn) Press->On; Press again->Off

Press one button for one time is working/ON , press the same button again is stop/OFF .

2)Latched/Inter-Lock: (Press Button 3 to learn) Press->On; Press other button->Off

Press one button is working/ON , press another button is stop/OFF . 

3)Momentary/Jog: (Press Button 2 to learn) Press and hold->On; Release->Off

Keep pressing one button is working /ON. Loosen your finger is stop/OFF.

4)Momentary & Toggle: (Press Button 4 to learn)  1-9 Buttons are Toggle and 10-18 Buttons are Momentary.

5)Toggle & Momentary: (Press Button 5 to learn)  Channel 1 is Toggle , other 17 Channels are Momentary.

(Original Setting is  Momentary , change it by yourself.)

Decode: Fixed code, soldering

Power Supply (Operating Voltage): DC 12V 

Current: 8 mA

Sensitivity:-105 dBm

Operating Temperature:-20‘C - 70’C

Size:133 X 74 X 18 mm

3 .Learn code and Clear Code

1.Clear code:Press the learning button on the receiver for about 8 seconds,the indicator light turns off,that means the code has been cleared.

2.Learning code:Press the learning button on the receiver until the indicator light turns on,that means ready for learning. choose the transmitter key 1 2 3 4 5 to learn the code you need.the indicator light flashs 1 time means the code has been learned sucessfully.

Note:  433mhz and 315 mhz are available ,315mhz will be sent out if there is no demand on frequency

pacote inclued:

A:

1 x Receiver