Description:

：PWM control available

：Can carry current up to 10A, peak-to-peak up to 15A

：Wide power supply control signal 3V-20V

Specification:

：Module power supply voltage is: 3V-20V

：Signal terminal supply voltage: 3V-20V

：Support duty cycle range: 0-100%

：PWM frequency range: 400-2K

：The maximum peak-to-peak current is 15A, the current above 8A is recommended to increase auxiliary heat dissipation, and the maximum working current is 10A

：Size: 44mm*26mm*12mm

：Weight: 13g

Precautions:

：The power supply of the driver must not be reversed. It is recommended to connect a 15A fuse in series at the power interface. If the voltage is reversed, power-on may burn the drive module.

：It is recommended to use 400HZ to 2KHZ for PWM.

：When the motor is commutated, the motor needs to be stopped or braked first, and then commutated (to avoid a large instantaneous current that burns the current). The braking or stopping time of the motor should be longer than 0.5s, otherwise the module may be burned.

Package Contents:

：1*10A high power DC motor drive module

Only the above package content, other products are not included.

Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.