Description:This is a simple and easy use RFID with Finger Engine Starts Push Button Starts Stop system.Features:Easy to install and use.Can starts or stop your car much easier and keep your car safe at the same time.Push button engine starts.Automatically locks the host after stalling 15 seconds.One push button to starts or top the engine.RFID engine lock.This item is only work with DC 12V car.Specifictaions:Main material: ABSColor: blackVoltage: 12VStandby current: 8mA(last one month)Package size: about 150 * 100 * 50mm / 5.9 * 3.9 * 2.0inPackage weight: about 325g / 11.5ounceWorking voltage: DC voltage DC=12V, currently does not support 24V power supply.Standby current: 8mA (Note: continuous standby for up to one month)Button display: blue light (Note: the blue light is off in the anti-theft state, and flashes after the fire burglar is withdrawn)Enter anti-theft: The system automatically locks the engine every time the engine is turned off for 15 seconds, the vehicle is powered off, and the button lights are turned off.Exit anti-theft: use ID induction card to get close to the induction coil when getting on the vehicle.Blinking lamp output flashing voltage: DC=12V (Note: The output time is controlled by the foot brake)Brake light output mode: The brake light flashes 4 times after each step on the brake, then lights up, and goes out after loose feet.Alarm method: Brake light alarm, when the vehicle illegally steps on the brake, the brake light will flash and alarm for 15 seconds.Packing List:1 * Car Engine Push Starter Host1 * Push Starts Stop Button1 * RFID Sensor Ring2 * RFID Key
1 * Installation Wire
