150PSI Car Air Pump Cordless Portable Vehicle Tire Inflator Smart Wireless Air Pump Bike Inflator Bicycle Tire Electric Air Pump
Description:
1. The electric portable pump developed! Please read this instruction manual carefully before using the pump for the first time.
2. This product is developed for emergency pumping of high-pressure tires used in bicycle international competitions. It is also suitable for inflating ordinary bicycles, cars, motorcycle tires, balls, inflatable toys and other entertainment and tourism products.
Specifications:
Input voltage: charger 5V/2A
Working current: 1-5A
Maximum current: ≤5A
No-load current: ≤2A
With USB charging: 5V 1A
Air efficiency: charge 1.95 mountain tires for 2 minutes
Emergency lighting: 80 lumens for 7 hours
Working temperature: -20℃～70℃
Noise decibels: 60～80 decibels
Charging method: Micro USB
Charging time: about 3 hours
Attainable pressure: 150PSI/10.3BAR/990KPA/10.5KG/CM
Size: about 120*78*50mm/4.72*3.07*1.97inch
Instructions for use:
1. Insert the pin of one end of the charger into the car USB in advance, and insert the other end of the USB plug into the USB socket on the top of the pump to charge the air pump. The normal charging time is 4 hours after the first charge and until each charge is fully charged.
2. Turn on the power button, the LCD screen starts to display, press the switch button to switch between the four air pressure units of PSI, BAR, KAP, KG/CM⊃2;, select the unit you want, and press the plus or minus button to set what you need. The value of the air pressure, after the flashing stops, press the power button to start the inflation, the bottom LED lights when inflating, and the LED lights will automatically turn off after the automatic charging stops.
3. Short press the light button to switch between motorcycles, cars, and balls.
Display motorcycle mode default 28PSI
Display car mode default 36PSI
Display ball mode default 8 PSI
4. After setting the profile mode, short press - or + to adjust the preset pressure value, long press - or + to quickly adjust the preset pressure value.
5. Press the power button to start inflation. When the inflation pressure reaches the pressure value you set, the smart inflator will automatically stop the inflation work immediately, but the LED light is still on, and then press the power switch to turn it off.
6. When the inflation is completed, unscrew the air tube to complete the inflation, and be careful to connect the tire inflation connector to see if it is hot; it is normal that there will be a small amount of air leakage when the connector is unscrewed.
7. If it is judged that the tire pressure is too high, you can use the tire inflation connector to screw on the appropriate position on the valve core to deflate and reduce pressure.
8. Unscrew the tire inflation connector from the main engine, insert it into the storage slot at the bottom of the cylinder, put the cylinder away, and place it in a dry, ventilated and safe place.
Packing List:
1*M8 Air Pump Host
1*Inflatable Tube
1*Inflatable Accessory Connector
1*USB Charging Cable
