+
18pcs Car Dent Repair Puller Pratical Auto Body Dent Removal Repair Tool Kits Car Denting Remover Sheet Metal Sucker Puller Set
5、Money Back Guarantee: We hope our customers will receive our product with a reasonable price and excellent customer service. That's why our product is backed with 100% Return/Refund Guarantee, if for any reason you are not satisfied with this product, we'll refund your money with no question asked.
Features:1. Clean the dent with a clean damp cloth;2. Load the glue stick into the glue g un, pull the trigger to let the glue stick enter the glue g un, and turn on the power to preheat for 5 minutes;3. Use suitable brushed gaskets. Large dents require a large tensile washer. (Note: the largerThe greater the tension washer, the greater the tension);4. Pull the trigger and coat the wire drawing gasket with extrusion glue (the 4 holes of the gasket should be coated with hot melt glue);5. Quickly place the brushed gasket coated with hot melt glue in the center of the dent, and press gently until the glue is solidified and adhered (let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes, in winter)6. Align the T-type repairer, press the wire drawing gasket with hot melt glue, and pull the slide bar backward to pull up the dent;7. Check the circuit board. If the dent still exists, tap it lightly with a flattened hammer or pen;
8. Clean the repaired area with a clean damp cloth.
Specification:Material: aluminum alloy
Type: M10
Packing List:1 * T type drawer18 * gasket Notes:Due to the lighting effects and shooting angles, the color of the item and that shown in the picture might have a nuance.
Due to manual measurement, there might be a difference in the product size.
Origin : Mainland China
