Features:100% high quality and new brandNo tools requiredCan be used on any standard valve stemAdjust tire pressure from 6 to 30psi. in 3psi incrementsEasily disassembled to clean out sand or dirtSimply thread onto stems and walk awayManual start/stop valve built inMade from 100% brass material to eliminate rustAir immediately releases from tire once screwed on

Description:Material:BrassColor : As picture shownSize:As picture shownPressure Range:6-30 PSI

Step:1: Deflate a spare/extra tire to your preferred deflation pressure2: With the lock ring and adjusting cap wound down, screw your deflator on the valve stem.(Be sure to make sure theThreads are clean and in good condition)3: Loosen cap (counter-clockwise) until deflator pops open, then immediately tighten cap to the position where the airStops exhausting4: Turn lock ring up to adjust cap and tighten5: Installation is now complete and set to your preferred deflation pressure

Package included:1 X Tire Deflator

Note:1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color which is showed on the pictures.2. Please forgive 1 cm/0.39"-3 cm/1.18" measuring deviation due to manual measurement.3.When the tire pressure and the deflator setting within 8psi, a manual start may be required by fitting the deflator then lifting the center pin to start operation