Dear Customer

     Welcome to XiangJi automotive parts Store, you can ask our customer service if you have any questions about the product during the shopping process, we will try our best to help you solve the problem, thank you.

Product Name: external handleApplicable models:Kia K2 2017Material: ABSProduct color: carbon fiber grainProduct specification: 4 piecesInstallation method: 3M adhesive

Installation Notes

1. Simulate installation

Compare and adjust the position of the product to be installed on the vehicle to the correct position.

2. Surface

(1) Cleaning

Clean the body with a towel moistened with alcohol or water at the site to be installed.

(2) Precautions

Before installation, the car body must be kept dry, no dust, no oil, no wax, and the temperature is below 10 degrees. Be sure to heat the 3M glue on the body and product.

(3) Application of tackifier

Use a cotton swab or paper towel (a small amount) to wipe where you want to stick (body)

(4) Installation

Peel off the corner of the 3M protective film on the back of the product, leave the protective film on the outside, make the product match the installation position, then slowly peel off the protective film and press.

(5) Safe period

Do not come into contact with water, oil or large dust within 48 hours after installation.

Note: Please compare before installing. If the red film on the back is torn off, it will not be returned or exchanged