2.4GHz EWelink App Intelligent Remote Control for Ceiling Lamp LED Module Light Source Replacement Light Panel Remote Controller Specification: Product weight: about 40g Product size: 140x35x10mm/5.51x1.38x0.39in Description: Network distribution process of eWelink APP/WeChat applet: 1. Download the eWelink APP 2. Use APP/WeChat to scan the QR code on the device to generate the control interface 3. Within 5 seconds of powering on the E-Welink Smart Drive, press the open or close button on the APP control interface 3 times. If the lamp flashes, the network configuration is successful. Note: If the pairing fails within 5 seconds, you need to turn off the lamp and power it on again, and repeat the above operation. Code description: Power on the lamp using eWelink light intelligent driver, within 5 seconds, press the SETUP button on the remote control three times and the light will flash once to indicate successful code matching. Clear code description: Press the SETUP button for more than 5 seconds, the lamp flashes, and the code clear is successful. Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement. 

1 X Remote Control 

[relateproductdetail/]