Description

5699 flat sealantProduct capacity: 300mlProduct color: grayInitial solidification speed: 30 minutesFull solidification speed: 24 hoursTemperature resistance range: -59-316 degreesApplication: Decontamination and curing general purpose type, lubricating oil resistance, low odor, non-corrosive, low elongation and high elasticity. It can be used in rigid flange assembly. It has good resistance to engine oil, transmission oil, gear oil and hydroglycol. .595 flat sealantProduct capacity: 300mlProduct color: transparentInitial solidification speed: 2 hoursFull solidification speed: 24 hoursTemperature resistance range: -65-450Degree of application: Mainly used for engine oil sump sealing, oil-proof sealing strength, waterproof, insulation, high temperature resistance and low odor. Deacetic acid curing, good weather resistance and medium resistance, the maximum filling information is 6MM. Single component, room temperature vulcanization. It will solidify when exposed to air and in contact with moisture.598 plane sealantProduct capacity: 300mlProduct color: blackInitial solidification speed: 25 minutesFull solidification speed: 24 hoursTemperature resistance range: -55-260 degreesApplication: Decontamination and curing, excellent resistance to lubricating oil, dedicated to internal combustion engine parts and seals, strong and flexible, anti-aging, will not harden and shrink during wind and heat cycles, and break can also resist UV light and ozone. The maximum filling gap is 6mm.5910 plane sealantProduct capacity: 300mlProduct color: blackInitial solidification speed: 20 minutesFull solidification speed: 24 hoursTemperature resistance range: -59-260Degree of application: general purpose type for decontamination and curing, lubrication resistance, low odor, non-corrosive, low elongation, professional-grade automotive sealant, maximum filling gap 6MM. It has excellent oil resistance and the ability to withstand large movements of the glued joints. For example, stamping metal cover (such as timing gear cover, oil pan).587 plane sealantProduct capacity: 300mlProduct color: blueInitial solidification speed: 30 minutesFull solidification speed: 24 hoursTemperature resistance range: -54-260 degreesApplication: 587 is a one-component, thixotropic, high-performance RTV flat sealing silicone. It can block automobile engine oil well, and can reduce the load and vibration in the load area. Room temperature vulcanization, blue color, deoxime curing, good flexibility, high extensibility.5900 flat sealantProduct capacity: 300mlProduct color: blackInitial solidification speed: 20 minutesFull solidification speed: 24 hoursTemperature resistance range: -59-260 degreesApplication: Decontamination and curing, good flexibility, lubricant resistance and instant sealing, low odor, non-corrosive, allowing the bonding surfaces to move mutually, high viscosity can provide instant sealing, and the maximum filling gap is 6MM.596 plane sealantProduct capacity: 300mlProduct color: redInitial solidification speed: 1 hourFull solidification speed: 24 hoursTemperature resistance range: -54-315 degreesApplication: oil resistance/waterproof/high temperature resistance/low volatility, its non-slip properties make it suitable for horizontal plane/vertical plane: it can be used for equipment maintenance, small, medium/large size OEM is used for 650 temperature intermittent in the automotive industry) Sealing of the lower flange, as a sealing and adhesive when assembling and repairing industrial furnaces/ovens/boilers/abandoned stacks and high-temperature pipes.Precautions1. This product is not suitable for use in pure oxygen/or oxygen-rich environment, and cannot be used as a sealing material for oxygen or other strong oxidizing substances.2. Before bonding, it is important to check the compatibility of the cleaning solution and the glue when cleaning the surface with an aqueous cleaning solution. In some cases, water-based cleaning fluids may affect the curing and performance of the glue.3. This product is not suitable for use on plastics, especially thermoplastics that may cause stress cracking.It is recommended to confirm the compatibility of this product with the bonded material before using this product.4. Store in a cool and ventilated place, and do not store in flammable or oxidizer accessories. Keep the container tightly closed after use.When in use, there should be no open flames or equipment that may produce sparks, no smoking, and good ventilation conditions5. Wear necessary protective equipment when using. Avoid direct contact with skin and clothing. It is not advisable to directly inhale product vapors or contact for a long time.