Operation step:

1.Check the runout of lathe spindle first,control the runout value of nose within0.004mm;of cylinder or taper within 0.003mm shown as following:

Then put the 5C chuck onto the lathe spindle nose,with the setting hole in the right position for fixingeach other..pic 1 is screw lock,pic 2 is Cam lock.

For example type D:Use cam lock to fix the chuck on the spindle nose.Note to tighten the cam screws in multiple strokes crossly.touch the surface of taper hole with a micron indicator,then rotate the spindle slowly.Tighten the cam screws.When there is a low stable TIR value.This is very importance for srtting a runout value within 0.006mm.

5C Fixture

5C Collet is fit for this device,which can clamp tool or workpiece wirh different diameter and figure.It can be fixed on lathe,grinder and other special equipment,with such features as high precision,easy operation,safe application,strong clamping,etc.Package Includes:1*5C FixtureNote:1,The 5C collet chuck in the figure needs to be purchased separately2,Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures.Mainten ance:Slide part and swivel part shall be cleaned and lubricated periodically.Put into plastic bag for long time store.

Our Factory: