4-channel 2.4G wireless remote control receiver set toy model Model DIY remote Control Accessories TR100

Don't accept plate is driven by dry cell, suggest to use rechargeable batteries, or other battery can output high currentSpecial note: the remote control and receiver suit manufacturers have been debug well before the delivery, due to the circuit board belongs to the special commodity, the unstable operation of personal DIY, receive board do not accept return and after-sales service!Receiving plate do not accept return and after-sales service!Receiving plate do not accept return and after-sales service!Mind person yishen clap, thank you!

Direct manufacturers,Suitable for motor driven on the left and right sides of the toy model and differential turn differential toys (without steering gear!!!!!)

Can do differential ships, vehicles, tanks, etc., very suitable for DIY differential series!!!!!!

Suitable for:differentialDig for car tank truck, and special plate remote ship hit nest!Suitable for motor driven on the left and right sides of the differential turning toys: such as such as tanks of around 2 track was tracked robots and around two propeller remote ship hit nest class high power distance toy!On differential turning all the most familiar is the tanks, how to turn to just understand.

Pay attention to the toy is not suitable for ordinary cars:Because ordinary toy car in the direction of the motor and drive motor can separate action does not depend on differential turn!!

Launch plate: 2.2 V to 4.5 V

Receiving plate:3.6 V - 9 V

distance: 100 meters and antenna without extended!!!!!

Frequency:High frequency 2.4 G, with frequency set to use at the same time don't bunch of signal stability

Power:High power receiving plate integrated motor driver chip MOS tube driving efficiency is high, save electricity, not a triode drive!!Every all the way not to burn the greater than 2 a current plate, small and medium-sized motor within generally apply to 380 type*The frequency (the code) method:At the same time, press the back of the remote control and two keys to the right, thenAgain to electricity(Note: must be according to the two buttons on electricity againIndicator light flash), and the emission plate, into the frequency mode (if there has been no receiving plate automatically after 15 seconds exit), go up to the receiving plate, and then will see a remote control receiving plate and the slow light flash 3 times, meansPairing is complete.(If multiple transceiver to code at the same time, remember that every time can only to code a, other power)

Note:For frequency after success next time use without the frequency, if the launch board or receive board lost, can use of frequency pairing.Can do a matching set of receiver, remote control to control more than one receiver.

Each key-press functions are as follows: (A button down two motor linkage automatically implement differential turning)

Launch plate on the left side of the top button: press the two motor forward

Launch under the plate on the left side of the button: press the two motor reversal

Launch plate on the right side of the left button: when pressed a motor forward another motor is reversed (tank ship differential turningNo steering gear)

Launch plate on the right side of the right button: when pressed another motor is a motor reversal forward (differential turning tank shipNo steering gear)

Can also forward or backward at the same time, realize turn around!!!!!

Last reminder:

Motor positive and negative is not good, you can be arbitrarily connected two motor line, first click the launch button advance back key on the board, so forward when a motor is to turn the other motor is in reverse, simply reverse the two wires for motor ass, adjust good!In short, the motor of the second-line refore it turned in the direction of the will, in turn!Adjust and correct to weld the motor line again