40A 50A 60A 80A MPPT Solar Controller 230VDC 12V 24V 36V 48V 72V 84V 96V LiFePO4 Lithium Gel Battery Charge Discharge Controller
40A 50A 60A 80A MPPT Solar Controller 230VDC 12V 24V 36V 48V 72V 84V 96V LiFePO4 Lithium Gel Battery Charge Discharge Controller
MPPT controller: 30A 40A 50A 60A 70A 80A , automatic identification from 12V to 96V. Support photovoltaic 230V charging.
Basic functions:
Innovative maximum power point tracking technology, which can significantly improve the energy utilization rate of the solar system, and the conversion efficiency is as high as 97%;
Quickly scan the entire I-V curve, and efficiently track the maximum power point;
Three types of lead-acid batteries, sealed, colloidal, and open type, and lithium battery series charging programs are optional;
With automatic protection functions for overcharge, overdischarge, overload and short circuit;
RS485 communication interface, multi-machine communication is possible, and it is convenient to view the operating parameters of the controller;
MPPT controller features:
This controller is used in solar off-grid power generation system to automatically adjust battery charging and discharging. It has an advanced tracking algorithm to obtain the maximum power of the solar cell components and charge the battery; at the same time, its low voltage disconnect (LVD) function can prevent the battery from over-discharging and causing damage.
The battery charging process of the MPPT controller is optimized to extend battery life and improve system performance. Its comprehensive self-test function and electronic protection function can avoid damage caused by installation errors and system failures. Although the controller is easy to operate and use, in order to allow you to better use all the functions of the controller and improve your photovoltaic system, please read the instructions and instructions in this manual carefully.
1. 12v-96v automatic identification.
2. Lithium battery activation function.
3. compatible with lead-acid, colloid, iron lithium, ternary battery charging.
4. number of lithium battery strings can be adjusted.
5. User defined charge and discharge voltage, adjustable from 8V to 170V.
6. Photovoltaic charging current adjustable.
7. maximum support 230V photovoltaic input voltage.
8. Touch screen operating system.
9. support RS485 communication.
10. with DC output, street lamp charging function.
11. with battery temperature compensation function.
12. It has various protection functions.
13. can switch between Chinese and English
Product parameters
MPPT model | 30A | 40A | 50A | 60A | 100A | 120A | |
Rated charging current | 30A | 40A | 50A | 60A | 100A | 120A | |
Maximum PV input power | 12V system | 360W | 480W | 600W | 720W | 1200W | 1440W |
24V system | 720W | 960W | 1200W | 1400W | 2400W | 2880W | |
36V system | 1080W | 1440W | 1800W | 2160W | 3600W | 4320W | |
48V system | 1440W | 1920W | 2400W | 2880W | 4800W | 5760W | |
60V system | 1800W | 2400W | 3000W | 3600W | 6000W | 7200W | |
72V system | 2160W | 2880W | 3600W | 7320W | 7200W | 8640W | |
84V system | 2520W | 3360W | 4200W | 5040W | 8400W | 10080W | |
96V system | 2880W | 3840W | 4800W | 5760W | 9600W | 11520W | |
Charging mode | MPPT automatic maximum power tracking | ||||||
Charging mode | MPPT tracks maximum power, fast charging,balanced charging and floating charging | ||||||
Battery type | Lead acid battery | (12V / 24V/ 36V/ 48V/ 96Vautomatic identification)+(12V/ 24V/ 36V/ 48V/ 60V/72V/ 84V/ 96Vadjustable) | |||||
Gel attery | 12V/ 24V/ 36V/48V/ 60V/ 72V/ 84V/ 96Vadjustable | ||||||
Lithium ironphosphate | Unit voltage 3.2 * number of strings (2-45 adjustable) | ||||||
Ternary lithiumbattery | Unit voltage 3.7 * number of strings (2-45 adjustable) | ||||||
User defined | Equalizing charge, floating charge,DC discharge limit voltage adjustable: 8V-- 170V | ||||||
With lithium activation function | with photovoltaic input, there is charging voltage (activate lithium battery),and DC output can be used without battery | ||||||
Photovoltaic minimum voltage startcharging | The photovoltaic voltage is greater than+ 3v of the battery voltage (it can also becharged with small current in rainy days) | ||||||
PV maximum open circuit input voltage | 0-230V | 0-430V | |||||
Photovoltaic charging current adjustable | 0-30A | 0-40A | 0-50A | 0-60A | 0-100A | 0-120A | |
DC current output (street lamp function) | DCcontinuous output 25A | DC continuous output 60A | DCcontinuous output 100A | ||||
Temperature compensation | Automatically compensate the charging voltage and currentaccording to the battery temperature to prolong the battery life | ||||||
LCD touch button | LCD display: (generating capacity / photovoltaic voltage / battery voltage / chargingcurrent / power / operation status) | ||||||
Setting: (battery type, charging current, return to factory),Chinese and English display | |||||||
485 communication | 8-pin RS485 communication interface (operation status andsetting can be queried) | ||||||
Working environment temperature | -10℃~+45℃ | ||||||
Static power consumption | 2W | ||||||
Overall efficiency | 96.5%~99% | ||||||
Temperature protection | +85℃ | ||||||
Temperature rise protection | Reduce power output above 80℃ | ||||||
Protection function | Photovoltaic array short-circuit,over-voltage,over-current reverse connectionprotection,battery overcharge,reverse connection protection, under voltage protection | ||||||
Humidity | 0~90% RH (no condensation) | ||||||
Mechanical protection level | P21 | ||||||
Altitude | 0~3000m | ||||||
Size | 202mm*215mm*100mm | 218mm*265mm*100mm | |||||
Net / gross weight | 1.95Kg | 2.6Kg | |||||
Package size | 265mm*224mm*120mm | 315mm*240mm*120mm |
Installation and connection method
1. Installation safety distance:
Observe the following safety clearance to ensure that other equipment or objects are not within this range to ensure that there is enough cooling space.
2. Line connection method:The correct wiring sequence of the solar controller is as follows1. Connect the positive and negative poles of the battery first;2. Connect the positive and negative poles of DC load;Finally, connect the positive and negative poles of the solar panel.
Communication Interface : RS485 interface
Application : Charger Controller,Voltage Controller,Solar System Controller
Battery Types : Lifepo4/Lithium/Lead Acid/GEL/Lithium Iron Phosphate Battery etc
Certification : CE,FCC,RoHS
is_customized : Yes
Is Smart Device : YES
Battery Voltage : 12V 24V 36V 48V 72V 84V 96V
Origin : Mainland China
Maximum Current : 80A
Max PV Input Voltage : 230VDC
Model Number : 60A 80A MPPT Solar Controller