450W Portable Industrial Constant Temperature Hot Air Gun with Brushless Fan Set Digital Control Display Hot Air Gun

Features 1:

1. Digital control and display: The item features sensor closed loop, PWM digital temperature control, high power, rapid temperature rise, convenient temperature adjustment, digital display, accurate and intuitive, has multiple uses.

2. Brushless fan: Adjustable air flow, soft wind, long motor life and low noise.

3. Constant temperature mode: The air flow does not affect the temperature stability, and the temperature of the air outlet corresponds to the set value.

4. Automatic work: The hot air gun is equipped with a magnetic sensitive sensor, as long as the hot air gun is picked up, it will quickly enter the working mode (heating-blowing-constant temperature). When the hot air gun is placed on the bracket, it will enter shutdown mode(Stop heating-blowing cold wind-delayed shutdown-sleep standby). Can extend the life of the heating core, easy to operate.

5. Plug-in replacement: With plug-in structure, the heating core is easy to replace. Portable structure: small size and light weight.

6. Suitable for desoldering and welding of various components, such as: SOIC, CHIP, QFP, PLCC, BGA, SMD, etc. (especially suitable for desoldering of mobile phone cable and cable seat). Used for heat shrinkage, drying, paint removal, debonding, thawing, preheating, plastic welding, etc.

Features 2:

1. Place the welding torch and the equipped welding torch bracket on a flat work surface. The welding torch rests on the bracket and the power cord is connected. .

2. Choose a suitable air nozzle (try to use a large caliber air nozzle).

3. Apply power to the welding torch, because the welding torch is placed on the shelf, the system is in a dormant state,

The LCD window displays "000".

4. The welding torch works normally after leaving the stand. Adjust the T knob to set the temperature and adjust the A knob to set the air flow. After the temperature is stable, the LED indicator flashes quickly and enters the constant temperature state, which can be used for work. Setting temperature range: 280~480℃.

5. If you need to stop working, put the welding torch back on the bracket, then the system enters the automatic shutdown mode, cut off the heating current-high-speed cold air cooling to heat the body-turn off the fan after a delay of 30 seconds-the LCD window of the welding gun displays "000" - Go to sleep. The correct placement is shown in Figure 2.

6. Remove the welding torch from the welding torch bracket, the system immediately enters the working state with the current setting value, and can work normally after the temperature is stable. The window display setting value corresponds to the actual temperature of the current outlet.

7. When not using the machine, turn off the power switch.

Specification:

Name: Portable Brushless Constant Temperature Hot Air Gun

Model: GJ-8019LCD

Rated voltage: AC220V/50Hz

Power consumption: 450~700W

Motor type: ball bearing brushless

Motor life:>10000 hours

Airflow type: brushless fan soft wind

Air flow: 80~160 liters/minute (maximum)

Temperature adjustment range: 280℃∽480℃

Display form LCD display (resolution 1℃)

Welding torch line length: about 150cm/59.05in

Body size: about 48 (handheld), 67 (maximum) X length 300mm

Body weight: about 0.35kg (including wire)

Noise: less than 45db

Working environment: 0∽40℃

Storage environment: -20∽80℃

Storage humidity: 35%∽45%

Instructions:

1-LED heating and constant temperature status indication

2-temperature adjustment knob

3-air volume adjustment knob

4-power switch

5-LCD temperature and status digital display

6-stop

7-bracket with magnet

8-air collection nozzle (optional)

Packing List:

1*Hot Air Gun

4*Nozzle

1*Bracket

1*Heating Core