Dental alginate impression material

7 optional 454g/bag

Product description of general type

Product structure performance:1. The product is mainly composed of alginate, gypsum and diatomaceous earth.2. Dust free3. Mint flavor4. High elasticity5. High tear strength6. High dimensional stability

Instructions for use

1. Shake the material in the bag evenly before use2. Ratio of powder to water: 10g: 20~23ml3. Blending time: 30 seconds~45 seconds4. Working time: no less than 1 minute and 30 seconds5. Curing time: 3 minutes6. The temperature and hardness of the mixing water will directly affect the above time. It is recommended to use 23°C distilled water and deionized water.7. Rinse with water to remove saliva or debris on the impression. Immediately cast the plaster model8. Use type 3 or type 4 plaster that meets the requirements of IS06873 to pour the plaster cast.

Precautions

1. The temperature and hardness of the mixing water (tap water) will affect the curing time of the impression material. It is recommended to use distilled water or deionized water at 23°C ± 1°C. .2. It is recommended to use a perforated tray when taking the mold.3. In case of contact with eyes, please rinse with water for a few minutes. If symptoms persist, consult an ophthalmologist. Do not swallow or take orally. If you feel discomfort after swallowing the molding material, seek medical attention immediately.4. Those who are uncomfortable with the odor of alginate should not use it.

Storage

Please place the product in: temperature below 30°C, humidity below 80%, seal immediately after opening the bag to avoid moisture.