Specifications:

• Channel: 1 Channel

• Working Voltage: DC 5V / 12V

• Action Time (Under Rated Voltage): Less Than 10ms

• Release Time (Under Rated Voltage): Less Than 5ms

• Normally Opened Compatible Load: 10A 250VAC / 15A 125VAC / 10A 30VDC

Features:

• Working Voltage: DC 5V / 12V

• Normally Opened Compatible Load: 10A 250VAC / 15A 125VAC / 10A 30VDC

• Trigger Current: 2 - 5mA

• Trigger Voltage(LOW): 0 - 4V

• Trigger Voltage(HIGH): 4.5 - 12V

• Insulation Resistance: 100MΩ (500VDC)

• Power Indicator (Green), Relay Status Indicator (Red)

• User Friendly Interface Design. All Interfaces Can Be Connected Via Terminal Wiring Leads Directly

Output Interface:

• Normally Opened (NO) : Normally Open Pin of Relay. NO Pin is Not Connect to COM Pin When Relay Off. NO Pin is Connect to COM Pin When Relay On

• Common Pin (COM) : Common Pin of the Relay

• Normally Closed (NC) : Normally Close Pin of Relay. NC Pin is Connect to COM Pin When Relay Off. NC Pin is Not Connect to COM Pin When Relay On

Input Interface:

• DC+: Connect to Power Positive (According to the Relay Voltage Range)

• DC-: Connect to Power Negative

• IN: Relay Module Trigger Pin (High or Low Level Trigger Optional)

High or Low Level Trigger Select:

1. Use High Level Trigger

• When ¡°IN¡± input High Level Signal, the ¡°NO¡± connect with ¡±COM¡±

• When ¡°IN¡± input Low Level Signal, the ¡°NC¡± connect with ¡°COM¡±

2. Use Low Level Trigger

• When ¡°IN¡± input Low Level Signal, the ¡°NO¡± connect with ¡±COM¡±

• When ¡°IN¡± input High Level Signal, the ¡°NC

Package Contents:

4x 1 Channel Relay Module