50 Plates stainless steel heat exchanger Brazed plate type water heater SUS304

Options Instruction:

Same side: mean the 4 interface are in the same side

Different side: mean the 4 ports are in different side, each side with 2 ports.

Below 50 plates: suitable for washing hands and face

60-80 plates: suitable for kitchen washing dishes and dishes.

100-120 plates: can support bathing, mainly depends on the heat source's ability to supply heat.

Heat exchange rate: 85%

Heat source heating capacity> 50 ° C hot water temperature, comfortable bathing

Heat source heating capacity <50 ° C, hot water temperature, average bathing experience (winter)

Material:SUS 304 Stainless Steel, food grade

WeldIing Material: 99.9% Copper

Application:Home Brew Wort Chiller, Famliy Hot Water supply

Thread of Port A1、A2:1/2" BSPT Male

Thread of Port B1、B2:1" BSPT Male

Plates Number: 50 plates

Dimension:195x85x380mm

Heat Transfer Area/plate: 0.028 m2(0.30 ft2)

Thickness of One Plate:0.25-0.35mm

Working Temperature:-160 ℃ to + 185 ℃

Tap water interface: 20mm outer diameter

Heating interface:25mm outer diameter selection

(if you need 32mm outer diameter, leave a message to inform us of the interface caliber)

Please choose it according to your own demand. Thanks.

Besides above four interface, there is an air vent on the heat exchanger for 50 plates heat exchanger and above, this air vent's function is to avoid if there is some air remained in the exchanger and you need to release the remain air so that the water can go through when you first time use this heat exchanger. For other time, the air vent need to be plugged with a plug