[Main function] Use UV coating for pretreatment before printing metal materials, which can significantly improve the adhesion, gloss, wear resistance, water resistance, and high hardness of UV ink on the surface of glass, stainless steel, and aluminum alloy.

[Using Instructions for UV Coating]

1. Ceramic tiles:

    Processing method: wipe the surface of the tiles with a dust-free cloth before printing, and then use a spray gun or sprayer to apply a special tile coating, evenly spray on the surface of the tiles, and then put the tiles in the oven after spraying, using 100-150 Bake at high temperature for 15-30 minutes.

2. Metal:

    Treatment method: wipe the surface of the metal material with a dust-free cloth before printing, and then use a spray gun or sprayer to spray the surface of the metal material evenly with a special metal coating. After spraying, put the metal in the oven and use 100 -Bake at a high temperature of 150 degrees for 15-30 minutes.

3. EVA:

    Processing method: wipe the surface of the EVA material with a dust-free cloth before printing, and then use a spray gun or sprayer to spray the EVA surface evenly with a special EVA coating. After spraying, put the EVA in the oven and use 80- Bake at 120 degrees for 15-30 minutes

4. Glass:

    Treatment method: wipe the surface of the tile with a dust-free cloth before printing, and then use a spray gun or sprayer to apply a special glass coating to the tile surface evenly, or you can wipe the coating by hand. Place the tiles after spraying. In the oven, bake at a high temperature of 100-150 degrees for 15-30 minutes.

5. PE:

    Processing method: wipe the surface of PE with a dust-free cloth before printing, and then use a special corona bar for corona treatment, so that the atomic structure of the PE material is not so tightly arranged, and then use a spray gun or spraying machine to coat it with a special PE Layer, spray evenly on the surface of PE, put PE in the oven after spraying, and bake at 80-120 degrees for 15-30 minutes.

6. Melamine board:

    Processing method: wipe the surface of the melamine board with a dust-free cloth before printing, and then use a spray gun or sprayer to coat the melamine board with a special melamine board, and spray it evenly on the surface of the melamine board. After spraying, put the melamine board in the oven. Bake at a high temperature of 100-150 degrees for 15-30 minutes.

7. Silica gel:

    Treatment method: wipe the surface of the silicone with a dust-free cloth before printing, and then spray the silicone material with a 150 degree flame spray gun to soften the silicone material (it can’t be melted, it’s OK if it’s slightly soft), and then use a spray gun or sprayer Use a special silica gel coating to spray evenly on the surface of the silica gel. After spraying, put the silica gel in the oven and bake it at a high temperature of 80-120 degrees for 15-30 minutes.