50V 5A CNC Step-Down Power Supply Module Adjustable Voltage Current Meter Constant Voltage Constant Current DC LCD display

Feature:LCD can display input/output voltage, output current/output power/output capacity/output timeCNC adjustment, accurate and fast, can lower voltage, output voltage can be adjusted at will in 0-50.00V, limit current 0-5.000A can be adjusted at willAnti-reverse connection protection of input end, which will not burn out when connected reverselyOutput end is poured backward without burningThe module can be set to open/close by defaultMultiple software protection mechanisms are available, and protection threshold is adjustable. When the working parameters of module exceed protection threshold, the output will be  automatically closed.Using synchronous rectification technology, conversion efficiency is high: the efficiency is more than 90%.Add heat sink. Specification:Model: WZ5005LDisplay: LCDInput voltage range: 6 -55.00VInput voltage resolution: 0.01VOutput voltage range: 0 -50.00VOutput voltage resolution: 0.01VOutput current range: 0 -5.000AOutput current resolution: 0.001AOutput power range: 0 -250.0WInput voltage accuracy: ±(1%+5-digit)Output voltage accuracy: ±(0.3%+5-digit)Output current accuracy: ±(0.5%+5-digit)Typical value of output ripple: 150mV peak valueNormal operating temperature range: -10 -40℃Capacity measurement range: 0 -99.99AHStatistical error of capacity energy: ±2%Statistical time range: 0 -100 hourDepressurization mode: differential pressure >0.05%+1VProduct size: 79 x 43 x 42 mmFunction:Soft start: YesProtection Mechanism:Input anti-reverse protectionInput under-voltage protection (5.8-50V adjustable, default 5.8V)Output over-voltage protection (0-51.00V adjustable, default 51V)Output over-current protection (0 -5.100A adjustable, default 5.1A)Output over power protection (0-260W adjustable, default 260W)Overtime protection (adjustable from 0-100h, closed by default)Over-capacity protection (adjustable from 0 -99.99Ah, closed by default)