Introduction of the motor
1. Name of the motor: JGB37-550 Micro 6v 12v DC Gear Motor
2. Rated voltage have DC 6V and DC 12V
3. DC 6V ; You can choose the no load speed have :
9rpm/14rpm/26rpm/43rpm/55rpm/80rpm/130rpm/240rpm/380rpm/725rpm/1150rpm
Rated torque between 0.5 To 30 KG.CM; stall torque: between 1-35KG, it is recommended that your project load not exceed the rated torque; select a no load speed in DC 6V, there will be corresponding rated torque and stall torque, please refer to the parameter table below.
4. DC 12V ; You can choose the no load speed have :
18rpm/28rpm/53rpm/86rpm/110rpm/160rpm/260rpm/480rpm/770rpm/1450rpm/2300rpm
Rated torque between 1.2 To 28 KG.CM; stall torque: between 2.1-35KG, it is recommended that your project load not exceed the rated torque; select a no load speed in DC 12V, there will be corresponding rated torque and stall torque, please refer to the parameter table below.
5. Direction of rotation of the motor: CW Or CCW ; Support Reversed
6. The shaft shape of the motor : D type, please refer to the size chart below for all dimensions of the motor.
7. Gear material: Metal gears make the motor last longer
8. The speed of the motor can be adjusted using the speed controller. This motor and speed controller are sold in combination. You can refer to the combination sales introduction below.
9. The motor has standard noise when working. If your project has requirements for the working noise of the motor, please consult us before purchasing. We will give you some suggestions. Thank you.
When the motor is reversed, the working sound of the motor will be greater than the forward rotation, which is normal.
10. Motor DC power connection is safe; the experiment proves that the motor voltage is lower than 36V without any danger.
11. This motor is suitable for a variety of micro-automation equipment. As long as you confirm that the motor voltage and torque of your choice are suitable for the voltage and load of your project before purchase, there is no limit to the scope of use of this motor.
The following is the motor parameter table
Sincere reminder
Your project load should not exceed rated torque of the motor, otherwise the life of the motor will be reduced
The parameters in the table below are the parameters for the motor connection rated voltage 6v / 12v
If the motor is connected to a non-rated voltage input, all parameters of the motor will change.
The following is a description of the quality materials and structures of this motor.
1. The wire in the rotor is made of pure copper. It is more conductive, resistant to temperature and prolongs the life of the motor. 2.High quality magnet, complete and does not change the magnetic field, so that the performance of the motor is better, and the rotor does not get stuck
3. high quality carbon brush, wear-resistant, prolongs the service life of the motor
4. D type shaft
The size is for reference only,the measurement will be slightly different,please pay attention before buying
How to buy the products you need
Package A : You will receive a motor
Package B : You will receive a motor and mounting bracket
Package C : You will receive a motor and speed controller;
The controller can adjust the speed of the motor ; For example, the speed of the motor you choose 12v 18rpm, you can adjust the speed of the motor from 0rpm to 18rpm
Package D : You will receive a motor and speed controller;
The controller can adjust the speed of the motor and change the direction of rotation of the motor, start and stop
Package E : You will receive a motor and wireless controller;
The wireless controller can control the direction of rotation of the motor, start or stop, and can remotely control the motor using the remote control, but it is not recommended to be too far away
For example 1, the speed of the motor you choose 12v 18rpm and Package A ; You will receive a motor with 12v 18rpm
For example 2, the speed of the motor you choose 12v 18rpm and Package B ; You will receive a motor 12v 18rpm and a mounting bracket
The following is the picture of the motor
