Description

Control Lights, TVs, Motors, Fans, Cameras, Video signals, Audio signals, electrically operated Doors/ Locks/ Windows.

一，Product characteristics1 Working frequency: 315MHz/433mhz ;2 Power supply scheme: AC100-240V;3Static current:≤2mA；

4 Reception sensitivity: 105 DBM5Maximum power: per channel≤1000w;6Operating temperature: -20~+70 ℃7Controllershellsize:: 70*41.5*22mm8Controllershellweight: 55.3g

二，Working mode:Jog/Momentary, self-locking and interlocking

Encoding Type: Learning Code

Add transmitter by the Learning Button on the receiver

The working mode switch is accomplished by the solder pads

Momentary :  Solder joints 1 2 3 and 4, no connection

Toggle        :   Solder joints    3+4

Latched     :    Solder joints     1+2

三，working/output way

Jog/Momentary:

press one button is working /ON.loosen your finger on the same button is stop/OFF .one channel switch(receiver) need one buttons remote control (transmitter )

Self -lock/Toggle:

press one button for one time is working/ON .press the same button again is stop/OFF .(one channel switch(receiver) need one buttons remote control (transmitter)

lnter-lock /Latched : press one button is working/ON ,press another button is stop/OFF .( one channel switch( receiver )need 2 buttons remote control (transmitter )

四， Learning methods:

Press the learning button, it means it has been putting in the study when the indicator light are flashing .then you press any buttons of the remote control to transmite signal .it means studying successfully when the indicator flash 3 times until the light goes out .

五， Clearance method:

Long press the code key for 5 seconds, the indicator light from on to off can clear all the remote control before the code.

pacote inclued:

A:

1x Transmitter(with battery)

B:

2 x Transmitter(with battery)