Description
Specifications:
Control Lights, TVs, Motors, Fans, Cameras, Video signals, Audio signals, electrically operated Doors/ Locks/ Windows.
1.Transmitter
Channel: 1 CH
Remote Control Distance:0-1000 M ( Ideal Distance without any block and signal interfere , it would rise and fall about 10%-90% with the block and signal interference.)
Encode: PT2262
Frequency:315 or 433 MHz
First, the working status description
The receiver has the following three working modes: single-way jog, single-way self-locking, and single-way interlocking. <You can change the working mode according to your own needs, but remember to change the working mode when you must power off. In the case of!
1. Jog: Insert the black jump cap on the receiver into the 2+3 two pins, which is jog. The board has the mark M<function literal translation: press and hold the remote control button to work, release and stop !>
2, self-locking: the black jump cap on the receiver is inserted into the 1+2 two pins, which is self-locking. The board has the mark T<function literal translation: the receiver is turned on and off on the remote control. Complete on the same button, press the remote control button in turn, the first button is opened, the second button is closed, the third button is opened, and the fourth button is closed.
3, interlock: the black jump cap 1, 2, 3 above the receiver is vacant, that is, interlock L < function literal translation: press the remote control A button to open B button is off or A button is off B button Open. If the remote control is a plurality of buttons, then which button is learned and which button is on, all other buttons are off!>
Second, increase or clear the remote control instructions
1. Learning: Press the learning button on the receiving board to light up and release it, then press and hold any button on the remote control to learn. After the green light flashes quickly, the key learning is completed, and the button can control the operation.
2, can learn more than 20 different address codes 2262, 2260, 1527 chip equivalent frequency fixed code learning code wireless remote control;
3. Clear code: Press and hold the learning button on the receiving board for more than 5 seconds. The green light will turn off from bright to flashing, indicating that the clearing is successful.
3.Package Included
1 x Receiver (with cover)
1x Transmitter (no battery inside)
