AZDENT Dental LED Curing Light Wide Spectrum 1 Second Cure Metal Body Built-in Light Meter Max 2500mW/cm² Wavelength 385-515nm
AZDENT Dental LED Curing Light Wide Spectrum 1 Second Cure Metal Body Built-in Light Meter Max 2500mW/cm⊃2; Wavelength 385nm to 515nm Dentistry Equipment
●Particulars
1.Product Name: LED Curing Light
2.Intended user: Dentist
3.Intended use site: Hospital or professional medical site
4.Light source: High-power blue light LED
5.Wave length: 385nm to 515nm
6.Light intensity: 800m W/cm2 -2500mW/cm2±10%
7.Depth of solidification:≥2mm
8.Power source: Rechargeable Lithium battery, 3.7V/ 2200mAh
9.Charger: Power Input: 100V to 240V.50HZ/60Hz
Input Power: 10VA
Power Output: DC5V/1A
●Operation
• The device is not provided sterile and is not intended to be sterilized when used.
* Press the S button, following four modes are available:
• Normal Mode: screen show P1. Press the S button to select of time which could be 5, 10, 15, 20 seconds.
• Pulse Mode: screen show P2. Press the S button to select of time which could be 5, 10, 15, 20 seconds.
• Strong Mode: screen shows P3. Press the S button to select of time which could be 1. 3, 5 seconds.
• During the operation, aim the top of the main unit, at the correct position, press the ON/OFF button and the main unit will produce "Bi" sound. The curing light radiates blue light and starts working according to the set modes mean while. It starts counting down and will produce "Bi", it stops working when counting down to 0, end of work, the digital display returns to the set work mode.
• During operation, the blue light can be stopped by press the power button at any time.
* After a working cycle, operator can press the ON/OFF switch to start another working cycle. Stop operating if the equipment began to heat obviously, do not restart until the equipment cool down. Suggest continues working cycle less than 10 times.
• Low power detective circuit is fixed inside of the main unit when low power is detected, the display screen of main unit will wink, please charge in time.
• This equipment will turn off automatically if there is no any action within 2 minutes; You can turn it on by press any button.
• The depth of solidification of composite is no less than 4mm per 10 second.
●Packing list:
1.The host*1
2.Disposable protective sleeve *100pcs
3.Charger*1
4.Wireless charging base*1
5.Shade plate*1
6.The instructions*1
Light intensity : 800m W/cm2 -2500mW/cm2±10%
Model Number : CV-215i Plus
Depth of solidification : ≥2mm
Wave length : 385nm to 515nm
Origin : CN(Origin)
Brand Name : AZDENT
Power source : Rechargeable Lithium battery
Light source : High-power blue light LED
Certification : NONE
Input Power : 10VA
Commodity Quality Certification : 3C
Modes : Normal/Pulse/Strong
Power Output : DC5V/1A