Common port

Common port: B- is the total negative electrode of the battery, and C- is the negative electrode for charging and output.(P-C-Common Port)P-No wiring required.Size table---common port10A-32MM*60MM*8MM15A-34MM*60MM*8MM20A-34MM*60MM*8MM25A-48MM*75MM*10MM30A-48MM*75MM*10MM or 50MM*90MM*10MM35A-50MM*90MM*10MM40A-64MM*125MM*10MM

Features:

ZY-3460-12S is an protection board scheme specially designed for battery packs of electric bicycles and electric motorcycles by Shen Zhen City Bisida Electronic Technology Co., Ltd. It can be applied to lithium batteries with different chemical properties, such as lithium ion, Li-polymer. Lithium iron phosphate, etc.• The main functions are: over charge protection, over discharge protection, over current protection, short-circuit protection, temperature protection, Voltage balance, etc.• Can provide 3S to 24S series solutions, provide 5A to 200A working current customization. Different voltages, currents. There are different parameter details. If you need to confirm. Please communicate with the seller to confirm accurate data.• Use top quality (A-level) protective integrated circuit IC, from the solution of Industry car level.BMS manufactured by high quality Mos and IC imported.• Double-sided PCB circuit board ,high anti-corrosion, high water resistance, high impedance ESD conformal Coating.Silicone sheet + aluminum sheet double-layer heat dissipation. Three anti-glue + insulation sheet, double-layer electrostatic insulation• Support customer samples, oem/odm, customization, if you have special needs, you can contact customer service. We will provide you with a complete solution.

Lithium Ion Data

Charging protection:Overcharge protection voltage (single cell): 4.2V(Min)4.25V(Typ)4.3(Max)Overcharge release voltage (single cell): 4.1V(Min)4.15V(Typ)4.2(Max)Charge overcurrent protection delay time: 500ms(Min)1000ms(Typ)1500ms(Max)Discharge protection:Over-discharge protection voltage (single cell): 2.6V (Min) 2.7V (Typ) 2.8 (Max)Overcharge release voltage (single cell): 2.9V(Min)3V(Typ)3.1V(Max)Overcharge delay time: 3000ms(Min)4700ms(Typ)6400ms(Max)Short circuit protection:Short circuit protection delay time: 200ms(Min)350ms(Typ)550ms(Max)Short-circuit protection release condition: unplug the loadSelf-consumption power: 30uA(MAX)Protection board conduction internal resistance: 25mΩ (MAX)Operating temperature range: -20°C (Min) 70°C (Max)Dropped wire protection: When a battery string is welded with missing or dropped wires. The circuit will be disconnected for protection.Remarks: The internal resistance of the protection board and self-consumption are dynamic values. During the test, the cell voltage must be ≥3.7V

Lifepo4 Data

Charging protection:Overcharge protection voltage (single cell): 3.7V(Min)3.75V(Typ)3.8V(Max)Overcharge release voltage (single cell): 3.5V(Min)3.55V(Typ)3.6(Max)Charge overcurrent protection delay time: 500ms(Min)1000ms(Typ)1500ms(Max)Discharge protection:Over-discharge protection voltage (single cell): 2.1V (Min) 2.2V (Typ) 2.3 (Max)Overcharge release voltage (single cell): 2.6V(Min)2.7V(Typ)2.8V(Max)Short circuit protection:Short circuit protection delay time: 200ms(Min)350ms(Typ)550ms(Max)Short-circuit protection release condition: unplug the loadSelf-consumption power: 30uA(MAX)Protection board conduction internal resistance: 25mΩ (MAX)Operating temperature range: -20°C (Min) 70°C (Max)Dropped wire protection: When a battery string is welded with missing or dropped wires. The circuit will be disconnected for protection.Remarks: The internal resistance of the protection board and self-consumption are dynamic values. During the test, the cell voltage must be ≥3.2V