Note: This is a converter, not a power bank.

Input voltage 12-24V, withstand voltage 32V, support PD and DC5525 power supply, it is recommended to be greater than or equal to 65W.

The self-consumption is less than 2.5mA, there is no BUG that the static power consumption is not reduced when the load is unplugged.

If you plan to charge an oppo OnePlus mobile phone, it is recommended to buy the A-mount version of ZC855 and match the original cable, which is compatible and can be quickly charged. Although the C port version 832 is also supported, compatibility is not guaranteed. Note that some mobile phones may display SuperVOOC instead of SuperVOOC2.0, which does not affect fast charging. The maximum current is 6A+ the same as the original one, which can be verified in the engineering mode.

If you plan to charge a 40w or 66w mobile phone, compatibility is not guaranteed.

Both versions do not support MIUI fast charge.

The protocol supported by the new version of the A-port version of ZC855: The original VOOC cable must be used to output 65w of SuperVOOC.

C port version ZC832 new version supports protocols: VOOC and SCP compatibility is not guaranteed. These two protocols are not officially compatible with C port. Although it can output, the mobile phone may not apply. To use VOOC or SCP for C port version, you can use C to A OTG head to turn to A port and then use A to C cable to plug in the mobile phone.

OV OnePlus looks at the current: input *#899# *#800# *#808# on the dial interface and select Manual Test-Equipment Debugging-Charging Test-SuperVoocCharger. After entering, it will be displayed as shown in the figure. Fast charging will not be displayed when the charging is accelerated because this is a vooc, not a warp, but it is indeed fast charging. vooc and warp just show the same speed and compatibility.

The new version of supervooc2.0 converter that supports up to 65w supports PD12-20V or DC12-32V input, and the DC port is 5.5*2.5mm inside and outside positive and negative.

The output is full-blooded SuperVOOC2.0-10v6.5a65w, and it is backward compatible with SuperVOOC-10v5a50w, VOOC5v4a20w, and DASH5v4a20w.

Ultra-small size 50*26*17mm, super heat dissipation, full load, ultra-low temperature and not hot.

The input voltage is 12-32V, the static power consumption is 2-3mA, pure step-down, the input needs to be higher than the output voltage by more than 1V to work normally, otherwise it will restart. For example, if you want to output a 20v protocol, it is recommended to input 21v or above.