Description

Feature: · Wireless control, easy to install · Control Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances with AC220V,AC85V-260V OR DC12V.. · You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors. · This switch can learn different coding remote controls (such as 2262,1527 ect.) · One/several transmitters can control one/several receivers simultaneously. · If you use two or more receivers in the same place, you can set them with different codes. If you use multi-button transmitter, you can control the controller with different buttons, it wont affect each other. · Operating Frequency:  433MHz · The wireless receiving controller, with high confidentiality, stable performance, low power consumption characteristic, jump line or dial the code switch coding.

 Output working way:

Output Working way for learning code switch-Jog, Self-Lock, interlock, changed by soldering or jump cap.

Momentary/ Jog--Press and hold -> On; Release -> Off. Toggle/ Self-lock--Press -> On; Press again -> Off· Latched/ Interlock--Press -> On; Press other button -> Off.

 Technique Data:

1.working voltage :DC12V 2.quiescent condition :less than 6mA 3.working temperature :-40'c+80'c 4.receiver sensitivity : more than -105dBm 5.working frequency :433MHz  6.output voltage:DC and AC is optional 7.output current : less than 3A 8.max load current:10A 9.68mm*48mm*16mm

Learning and delete methods  1.According to the learning code.Lights flashing, loosen the fingers, press the remote control, indicator light flashes 2 times and close any buttons.It means you learn successfully. 2.It can learn more than 12, 2262 or 1527 chips of different code of the wireless remote control 3.Delete/cleaning: press learn about eight seconds, indicator is closed, it means that you maintain information has been deleted successfully.   pacote inclued:

 1 x Receiver