DC5V/12V/80V/AC0-20V Micro Hydro Generator G1/2" Male Thread Water Flow Generator Water Turbine Generator Household
Features:
brand new and high quality
Low water pressure start: low flow loss waterway design, low water pressure start (0.05mpa).
1/2 outer thread: 1/2" outer thread is used for the inlet and outlet, the outer diameter is about 20mm/0.78inch.
Enlarge the scroll impeller: greatly improve the power generation efficiency, and at the same time add bearings to reduce wear.
Hydroelectric separation: Hydroelectric separation technology + dual magnetic coupling clutch.
Wide range of applications: micro-hydrogenerators are suitable for all kinds of intelligent faucets, induction faucets, shower room lighting and sound systems, gas water heaters, solar automatic water supply controllers and others.
Specifications:
Material: ABS
Voltage: DC 12V/ 3-wire AC 0 to 20V/ DC 5V/ DC 0 to 80V
Size: As Shown
Peak Output Voltage: 80v (1.2mpa)
Peak Output Current: ≥220ma (12v)
Line Resistance: 10.5±0.5Ω
Insulation Resistance: 10mΩ (dc100 Megohmmeter)
Closed Peak Pressure of Outlet: 0.6mpa
Peak Pressure of Outlet Opening: 1.2mpa
Starting Water Pressure: 0.05mpa
Axial Clearance: 0.2-1.0mm
Mechanical Noise: ≤55db
Generator Life: ≥3000h
Note:
1.Please allow 1-2cm errors due to manual measurement, make sure that you do not mind before you order.
2.Due to the difference between different monitors, the picture may not reflect the actual color of the item.
Package Includes:
1x Hydro Generator
Model Number : Hydro Generator
Type : Wind Power Generator
Origin : Mainland China
Certification : none
Mounting Base : Without Mounting Base