+
DIY Kit SMT SMD Component Welding Practice Board RGB LED Flashing Controller Resitor Diode Transistor Electronics Learning
One Side Weld - A
1. Function:
1>. It is DIY kit. User need to weld it.
2>. Interesting -- circuits installed with 3-12 v electricity is 10 road running water light, novel and fun.
3>. Training -- a total of 129 components (including the fly line), 313 solder joints, facilitate training speed.
4>. Comprehensive -- circuit with common components of 12 kinds, can be familiar with the use of more components
5>. Practical -- circuit with a particular function,
6>. Simulation -- with simulation test, can be used for the competition, selection,examination reference.
7>. Saving nature -- can be repeated desoldering use, improve utilization.
8>. Flexibility -- each element were numbered, not standard parameters, can adjust the parameters of flexible.
9>. Intelligent -- electric circuit intelligent judge whether the welding is normal, fault point lights.
10>. Promotion -- white label area, provide a variety of collocation, convenient selection,suitable for promotion.
11>. Technical -- circuit has a unique working principle, provides the complete schematic diagram, with 5 test points, can set fault examination, convenient to carry out various tests, is beneficial to improve the level of theory.
NOTE:There are 5 short circuit pad marked J1 to J6. User can weld it by pin from other components such as metal film resistors.
One Side Weld - B
Instruction Download link: http://attach01.oss-us-west-1.aliyuncs.com/IC/DIY-Manual/12235.pdf
1. Function:
1>.Multi-type SMD components
2>.Pure manual welding
3>.Integrated practice area and functional test area
4>.LED demonstration exercise results
5>.Easy operation
6>.Product Name:SMD-P Components Soldering Practice Board DIY Kit
7>.Work Voltage:DC 4.5V-5.0V
8>.Work Temperature:-40℃~85℃
9>.Work Humidity:0%~95%RH
10>.Size(Installed):91.4*60mm
Two Side Weld - C
1. Function:
1).This kit incorporates ultra-small components such as 0201 and 0402, and also incorporates SOT323 anti-static FETs, which greatly increases the difficulty of soldering, and is especially suitable for factory job selection and competition.
2).1901 SMD Welding Practice Exam Kit: There are 7 major functions as follows. Training, exams, and competitions are preferred.
3).Training - There are 10 components in 10 categories and 210 solder joints, which can be practiced or tested.
4).Comprehensiveness - The circuit has 10 types of commonly used components, adding 0201, 0402, anti-static field tube and other components, and can be familiar with the use of more components.
5).Practicality - The circuit imitates the anti-static requirements of the factory, increases the ultra-small components, and is more practical.
6).Simulation - with simulation questions, can be used for competition, selection, exams and other references.
Two Side Weld - D
1. Function:
1).Interesting - add 4-6V after the circuit is installed, it is a 10-way binary counting light + 11 road with a carry-in water lamp, novelty fun.
2).Training - There are 240 components and 603 solder joints. It can be divided into practice and test surfaces. It can be practiced or tested.
3).Comprehensiveness - The circuit has 14 types of commonly used components, adding 0201, 0402, anti-static field tube and other components, and can be familiar with the use of more components.
4).Practicality - The circuit has a specific function, which is an electronic work, and it is more practical to imitate the anti-static requirements of the factory.
5).Simulation - with simulation questions, can be used for competition, selection, exams and other references.
6).Conservative - can be used repeatedly for desoldering, improve the utilization rate, and both the front and the back can be used to save costs.
7).Flexibility - Each component is numbered, no parameters are specified, and parameters can be flexibly adjusted. Questions can be modified as needed.
8).Intelligent - the circuit can be energized to intelligently determine whether the welding is normal, 31 indicators can see the location of the fault point.
9).Innovative – the circuit design is novel and the difficulty can be adjusted as needed.
10).Technical - The circuit has a unique working principle, provides a complete schematic, and has 35 test points to facilitate various tests, which is conducive to improving the theoretical level.
One Side Weld - E
1. Function:
1).1801 patch 15 way lantern controller patch welding practice kit: has the following 10 major functions. Training, exams, and competitions are preferred.
2).Interesting - add 4-6V after the circuit is installed, it is a 7-channel binary counting light + 8 way water light, novelty fun.
3).Training - a total of 76 components (excluding pin headers), 240 solder joints, easy to train speed.
4).Comprehensiveness - The circuit has 8 types of commonly used components and is familiar with the use of more components.
5).Practicality - The circuit has a specific function and is an electronic work.
6).Simulation - with simulation questions, can be used for competition, selection, exams and other references.
7).Savings - can be used repeatedly for desoldering to increase usage.
8).Flexibility - Each component is numbered, with no parameters, and can be flexibly adjusted.
9).Intelligent - the circuit can be energized to intelligently determine whether the welding is normal, and the fault point has a light indication.
10).Innovative - the circuit design is novel and the difficulty is moderate.
11).Technical - The circuit has a unique working principle, provides a complete schematic, and has 10 test points to facilitate various tests, which is conducive to improving the theoretical level.
Application : Electric Toy
Model Number : SMD Welding Board
Package : SOP
Operating Temperature : -30~85 celsius
Origin : Mainland China
Brand Name : IS
is_customized : Yes
Type : Logic ICs
Condition : New
