DC 12V Multifunction Delay Timing on/off Relay Module 30A Switch Timer 1s~1 hour

The module consists of a microprocessor controlled delay time, timing precision (under a variety of ambient temperature error is less than 2%), and can be customized on the basis of this hardware you need delay function or other functions.

Features:

The trigger is turned on, the delay off. Configuration: trigger termination button, S6 disconnected.

After the trigger delay, after the arrival time on. Configuration: Trigger end button, S6 connection.

Module Working voltage:DC 12V

The length of the delay set by the time required to use a soldering iron values ??in the table were short set.

When all the time is short contacts are all turned off, the trigger is a bistable, that trigger what pull the trigger and then look off.

The control signal is triggered, signal cancellation or delay will not affect the holding after the trigger.

Again triggered during the delay, the re-timing

If the key short-circuited, then each will power the control board generates a trigger delay action, equivalent to pressing a trigger button.

The module circuit board size: 82mm x 35mm

The module with reverse power protection.

This module with opto-isolated, suitable for signal drive, if desired button triggers, give a 12V voltage to optocoupler.

Package:

1x Delay Timing Turn on / off 30A Relay Module Switch Timer

(The C2 capacitance is not contain)