Name: Electromagnet LSP20/15 Small Electromagnetic DC 5V 12V Coil Electric Magnet Suction 3KG Electromagnet Solenoid - Yiwiqi - 269590 - en.qupqukj.id
Brand: PCBFUN
SKU: 1005004741269590
Price: 1.65 USD
Availability: InStock

Electromagnet LSP20/15 Small Electromagnetic DC 5V 12V Coil Electric Magnet Suction 3KG Electromagnet Solenoid

Category : Electronic Components & Supplies | Active Components

USD 1.65USD 2.66

Electromagnet LSP20/15 Small Electromagnetic DC 5V 12V Coil Electric Magnet Suction 3KG Electromagnet Solenoid

Description
Specification

Description

Product selling point: 1. Smooth surface and strong suction 2. Low power consumption, low temperature rise, no residual magnetism after power failure 3. Flame retardant wire, soft and durable 4. Has good temperature stability and insulation, strong electrical conductivity 5. Using electric pure iron, one-piece molding, no residual magnetism after power failure Use environment: 1. Avoid long-term adsorption of high-temperature iron parts 2. During use, it will generate heat by itself, so that it is in a state of natural heat dissipation 3. When using in a high temperature environment, an external cooling device should be added, and the temperature should be controlled within 130 degrees. 4. Do not collide with hard angular objects on the suction surface. Once the suction surface is uneven, the suction force will decrease and affect the adsorption effect. Installation Notes: The electric suction cup must meet the following conditions in order to achieve the maximum suction value: 1. The object to be sucked must be a material with good magnetic permeability 2. Correct use of power supply and voltage 3. The surface of the object to be sucked should be very flat and clean 4. The suction contact area of the object to be sucked must be greater than or equal to the suction surface of the electromagnet (the maximum outer diameter of the electric suction cup) 5. When the thickness of the object to be sucked is greater than 8mm, the nominal suction force can be achieved, and the suction force also decreases when the thickness decreases. 6. There can be no distance from the direction of the object to be sucked, and no objects can be separated If any of the above conditions are violated, the suction force will be reduced, and the maximum suction force value indicated by the electric suction cup will not be reached. 7. The electrification rate is 100% within the rated voltage and its range, and the suction can be adjusted by adjusting the voltage (proportional relationship) 8. Use screws to connect the screw holes on the back to install and fix Parameter: Voltage: DC5V/DC24V Suction: 3KG Package Included: 1* Electromagnet