FAQQ: Does this battery tester have power?

A: No, it can only be powered by the tested battery.

Q: Can FBT200 Charge the Battery?

A: No, it will not charge any batteries, But it can detect the battery.

Q: Can FBT200 get the battery life?

A: Yes, it will give you the health of the battery and a charge percentage.

Q: What batteries can the FBT200 be used on?

A: it can be used on 12V and 24V batteries.

Q: Why is the result of the FBT200 test inaccurate?

A: Maybe the parameter you set is wrong. Please input the correct data from the battery label.

Q: Why nothing is displayed?

A: Please make sure your battery voltage is higher than 8V and The positive and negative clamp are connected correctlyA: Cranking Amps Standard, effective starting current value at 0'C

Great Compatibility

The battery tester is designed for 12V and 24V lead-acid batteries with a capacity of 3AH-200AH, including regular flooded, AGM flat plate, AGM spiral, gel, and deep cycle batteries. It covers most battery rating standards such as SAE, DIN, IEC, EN, CA, JIS.

The battery tester can detect all automotive 12v and 24v (test range: 3Ah - 200Ah) lead acid batteries, such as regular flooded, AGM flat plate, AGM spiral, GEL and deep cycle batteries. It gives you accurate test results in just 3 seconds based on SAE,DIN, IEC, EN, CA, JIS standards.(Note:You cannot test lithium batteries.)

Select the test program according to the battery type/standard/CCA, the battery tester will start working and quickly show you the battery CCA value, health (%), state of charge (%), voltage (V), internal resistance (Ω) and so on. By analyzing the test data, you can check the condition of the battery and judge whether it is in good condition or needs to be replaced to avoid accidents caused by battery failure. Its small, compact design makes it easy to carry and store.

Load Test & Charging Test

To test the battery's start-up capability, maximum discharge capability and charging capability through the start-up load test, maximum working load test and charging test respectively.

Multiple Vehicle Applications

The battery tester is a more advanced tool with the capability to check 12V and 24V battery systems for automotive, marine, motorcycle, boat, truck, etc. Works on both in-vehicle battery and out-of-vehicle storage battery. It can also be used for analyzing starting system and charging system

Fast Testing & Reliable Results

It adopts the advanced conductance testing technology to provide you with reliable results. Displays battery parameters in about 2.5 seconds to advise you if you need to replace the battery.

Easy to use: The intelligent battery analyzer is connected to the battery interface through the alligator clip, which is convenient for installation and testing. The LCD display can clearly display the test results, making your operation easier.

Main function: Car battery test

Usage scope: All car lead-acid starter battery, including regular flooded, EFB, AGM tablet battery, AGM winding battery, GEL battery,WET, etc.Suitable for: Automobile facory, garage, auto battery manufacturer, Test result: SOH, SOC, CCA Value, IR, etc.Voltage measure range: 8-30VDCHousing material: ABS plastic

Package includes

1pcs Lead-acid battery tester