FOXWELL BT705 Car Battery Tester 12V-24V Truck Battery Cranking Analyzer Charging System Health Status OBD2 Car Diagnostic Tool

The latest BT-705 (100-2000CCA)Battery Analyzer form Foxwell is dedicatedly developed to test 12V regular flooded, AGM flat plate,AGM spiral and gel batteries and 12V & 24V starting and charging system.It provides a quick,easy and affordable solution for technicians to check battery health and detect faults of starting and charging system.

FOXWELL BT705 12V Battery Load Tester

•Multiple vehicle applications ¨C passenger cars and heavy duty trucks.•Tests batteries from rated from 100 to 2000CCA. Cold Cranking Amps settings is in increments of 1 and you can line up with your battery ratings from 100 to 2000CCA.•Tests multiple battery types- regular flooded, AGM flat plate ,AGM spiral and gel.•Tests multiple rating systems-CCA,BCI,CA,MCA,JIS,DIN,IEC,EN,SAE,GB.•Tests the batteries on the car directly- no need to remove the battery.•Quick and accurate test result display in just 3 seconds, detects bad cells directly.•Tests 12&24 volt charging system.•Quick starter analysis without disabling the ignition.•Does not emit light, heat or spark ,or discharge battery-keeps operation safe for all levels of users.•Automatic temperature compensation.•Ripple voltage test for easy and intuitive check of faults.•Extremely easy to use with large backlight LCD display and menu-driven operation.•Rubberized sleeve protects, 7.8ft tester cable with metal alligator clips. Viewing/Printing Test Results, allow you view test results and print the data via optional Bluetooth printer.SOH: the health status of batterySOC: the state of chargeRES: the internal resistance of the battery

Foxwell BT705 Support Functions

Foxwell BT705 Support Languages

English, French, German, Dutch, Spanish, Polish, Portuguese, Italian,Turkish, Russian

MULTIPLE BATTERY TYPES TEST

work for regular flooded, AGM flat plate, AGM spiral and gel

VEHICLE BATTERY ANALYSIS

•GOOD BATTERY:Battery is in good condition.•GOOD-RECHARGE:Battery is in good condition but low current.•CHARGE & RETEST:Fully charge the battery and retest. If you still get CHARGE & RETEST after fully charge the battery, replace it.•REPLACE BATTERY:The battery is almost dead or the connection between the battery and battery cable is poor. Replace the battery and retest; or disconnect the battery cables and retest the battery using the out-of-vehicle test.•BAD CELL-REPLACE:The battery may be damaged.

VEHICLE CRANKING ANALYSIS

•CRANKING NORMAL: The starter voltage is normal and the battery is fully charged.•LOW VOLTAGE: The starter voltage is low and the battery is fully charged.•CHARGE BATTERY: The starter voltage is low and the battery is discharged. Fully charge the battery and repeat the starter system test.•REPLACE BATTERY: Battery must be replaced before the starting system can be tested.•NO START: No vehicle start detected.•CRANKING SKIPPED: A start was not detected.

VEHICLE ALTERNATOR CHARGING SYSTEM ANALYSIS

•NO PROBLEMS: System is showing normal output from the alternator.•NO OUTPUT: No alternator output detected. Check connections to and from the alternator, especially the connection to the battery.L•OW OUTPUT: Alternator not providing sufficient to power the system's electrical loads and charge the battery. H•IGH OUTPUT: Alternator voltage output exceeds the normal limits.E•EXCESSIVE RIPPLE: Excessive AC ripple detected. One or more diodes in the alternator are not working or there is stator damage.

Package List:

Package including:1pc X Car Battery Analyzer Foxwell BT705 Main Unit1pc X User's Guide1pc X Carry Pouch