Good Quality Speed Controller ESD5522 diesel generator electronic speed governor Supply 12 or 24 VDC Battery System
Good Quality Speed Controller ESD5522 diesel generator electronic speed governor Supply 12 or 24 VDC Battery System
Description
The ESD5522E /5525 Series speed control unit is an
all electronic device designed to control engine speed with fast and
precise response transient load changes.
(PER5520E is designed for EFC series.)
Isochronous Operation/Steady Stability---- +/-0.25%
or better Supply----12 or 24 VDC Battery Systems(transient&reverse voltage protected)
Power Consumption----50 ma continuous plus acutator current
Maximum Actuator Current at 25celsius (77celsius F)----10 Amps continuous
Input | Supply | 12 or 24 VDC Battery System (Transient and Reverse Voltage) |
Polarity | Negative Ground (Case Isolated) | |
Power Consumption | 50 ma continuous plus actuator current | |
Actuator Current Range @ 25 Deg. C - (Inductive Load) | Min.2.5 Amps; Max. 10Amps continuous | |
PID | PID parameter is different with ESD5500 | |
Speed Sensor Signal | 0.5-120 Volts RMS | |
Performance | Isochronous Operation/Steady State Stability | ±0.25% or better |
Speed Range/Governor | 1K to 7.5K Hz continuous | |
Speed Drift with Temperature | ±1 Max | |
Idle Adjust CW | 60% of set speed | |
Idle Adjust CCW | Less than 1200 Hz. | |
Droop Range | 1-5% regulation | |
Droop Adj. Max. (K-L Jumpered) | 400 Hz., ±75Hz. Per 1.0A change | |
Droop Adj. Min. (K-L Jumpered) | 15Hz., ±6Hz. Per 1.0A change | |
Speed Trim Range | ±200 Hz | |
Remote Variable Speed Range | 500 - 7.5 Hz. Or any part there of | |
Terminal Sensitivity J | 100 Hz., ± 15Hz / Volt @ 5.0 K Impedance | |
Terminal Sensitivity L | 735 Hz., ±60 Hz / Volt @ 65 K Impedance | |
Terminal Sensitivity N | 148 Hz., ±10 Hz / Volt @ 1 Meg. Impedance | |
Terminal Sensitivity P | 10 VDC Supply @ 20 ma Max | |
Environmental | Ambient Operating Temperature Range | -40 to +85 Deg. C |
Relative Humidity | Up to 95% | |
All Surface Finishes | Fungus Proof and Corrosion Resitant | |
Reliability | Vibration | 1G at 20 to 100 Hz. |
Testing | 100% Functionally Tested |
Speed Sensor Signal : 0.5-120 Volts RMS
Input Supply : 12 or 24 VDC Battery System (Transient and Reverse Voltage)
Speed Range/Governor : 1K to 7.5K Hz continuous
Power Consumption : 50 ma continuous plus actuator current
Origin : Mainland China
Brand Name : LIXiSE
Idle Adjust CCW : Less than 1200 Hz.
Polarity : Negative Ground (Case Isolated)
is_customized : Yes
Model Number : ESD5522
Ambient Operating Temperature Range : -40 to +85 Deg. C
Speed Trim Range : +/-200 Hz
Vibration : 1G at 20 to 100 Hz.