Brand new X79 BTC 5 card slot mining board with E5 2620 V2 2011Pin CPU+24PIN Power Connector+RECC 4G DDR3 memoryIf you want to use other CPUs, please use CPUs below 2630, such as 26 series such as 2603 2609 2620 2603 V2 2609 V2 2620 V2The BTC X79 motherboard uses the H61 chip and a single-channel 2011 socket CPU; Design 5 Pcie3.0X8 graphics interfaceThe computing power of a single card is up to 48MH/s or more, and it perfectly supports 4G video memory graphics cards, which greatly improves the mining function of computing power.In-line 5 card X79 (H61 chip) motherboard, support 3060 3070 3080 3080 TI graphics card!!! 60mm large-spacing graphics slot.Specification:Supported CPU platform: for XEONChipset: for H61Supported CPU type: E5-26XX (supports 26 series CPUs below 2630)Audio chip: N/ASupported CPU socket: 2011Network card chip: 1*REALIEK 8105E 100M network cardMemory type: DDR3 supports desktop and server memorySupport Maximum memory capacity: 32GWorking environment: 0-95% relative humidity, non-condensing, -20°c-60°cMemory description: Support 1066/1333/1600/1866MHz frequencyDetailed interface:1. CPU socket: 1*LGA(2011)2. USB port: 4*USB 2.03. USB pin: 1*USB 2.04. Hard disk interface: 1*SATA 3.05. Hard disk interface: 1*MSATA6. Network card interface: 1*LAN7. Memory slot: 1*DDR38. Chipset: BGA (H61)9. BIOS initial restore: JCMOS10. Graphics interface: 5*PCI Express 3.0 8X, pitch 60mm11. Motherboard/graphics card power supply: 6*POWER_PE12. Self-initiated call: AUTO_ONColour: blackMaterial: PCBSize: 322 x 188mmPackage Contents:1 x motherboard1 x 24P short connector1 x RECC 4G DDR3 memory module1 x E5 2620 V2 CPU (installed in the motherboard)Notice: Different batches of products are slightly different, and the colors of the slots and the bottom plate are random, the specified color is not accepted, thank you.Only the above package content, other products are not included.Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.