How to use？

1.Use a line board to find the dent,clean the dent with a clean cloth; 2.Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes; 3.Pull the glue gun's trigger to let the hot melt glue apply evenly onto the gule tabs; 4.Fast place the gule tabs with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter); 5. Use the dent lifter/silde hammer/T-handle dent puller to pull up the dent; 6. Check with a line board. If dent still exists, knock it slightly with a Rubber Hammer and tap down; 7. Clean the repaired place with a clean wet cloth.