HDC1080 CCS811 Carbon Monoxide CO2 VOCs Air Quality Numerical Gas Temperature Humidity Sensor Module Electronic DIY For Arduino
Characteristic:
This module integrates two sensor chips CCS811 and HDC1080 on one board. The measured values of the two sensors can be read separately by IIC communication. The HDC1080 is a low power, high precision, miniature digital temperature and humidity sensor chip.
The CCS811 is a low-power miniature gas digital sensor for air quality monitoring. A metal oxide (MOX) sensor is integrated to measure the total equivalent volatile organic compound eTVOCs and equivalent eCO2 content. A microcontroller MCU is integrated inside the chip. The gas content value measured by CCS81 is self-corrected by reading the temperature and humidity value of the HDC1080 sensor and writing it to the CCS811 internal environment temperature and humidity correction register.
Working temperature: -20 ° C ~ 70 ° C
Humidity sensor measurement range: 0 ~ 100% RH
Humidity sensor accuracy: 14 bits error ± 2% RH
Humidity repeatability accuracy: ±0.1% RH
Humidity sensor response time: 15s
Humidity conversion time: 8 bits 2.5ms, 11 bits 3.85ms, 14 bits 6.5ms
Temperature sensor error: ±0.4 °C (ambient temperature 5 ° C ~ 60 ° C)
Temperature repeatability accuracy: ±0.1 °C
Temperature conversion time: 11 digits 3.85ms, 14 digits 6.5ms
IIC communication frequency: 400KHz
IIC slave address: 1000000x (x read/write control bit)
Power supply: recommended 3.3V
Power supply: recommended 3.3V
Power consumption: up to 60mW
IIC communication frequency: 400KHz
eTVOC detection range: 0 ~ 32768ppb
eCO2 detection range: 400 ~ 32768ppm
Automatic baseline correction time for metal oxide sensitive layer: 24H
Allow configuration and read sensor time after power up: at least 20 minutes
ADD: CCS811 slave address selection bit, the default is connected to low level 1011010x, connected to high level 1011011x (x bit read and write control bit)
RST: CCS811 reset control terminal, active low, not connected to high level when not in use, do not hang
INT: CCS811 measurement end or over-threshold interrupt source output low level
WAK: CCS811 wake-up control input, active low
SDA: CCS811 and HDC1080 common IIC data signal lines
SCL: CCS811 and HDC1080 common IIC clock signal lines
VCC: CCS811 and HDC1080 common power supply terminal
Brand Name : EC Buying
Material : Mixture
Origin : Mainland China
Output : Digital Sensor
Theory : Optical Sensor
is_customized : Yes
Type : Gas Sensor
Model Number : CCS811 HDC1080
Usage : Gas Sensor