Description
Hot New 8-120V LCD Acid Lead Lithium Battery Capacity Indicator Voltmeter Voltage Tester GY-6S
Product introduction
:
Gy-6 is a universal LCD residual power display module, suitable for lead-acid, lithium battery or lithium iron phosphate battery.There are multiple display interfaces and you can switch between them. It has multiple display interfaces and users can switch by themselves.It is widely used in equipment with batteries, such as balance car, mobile portable power, electric vehicle, UPS, EPS, etc. The electric quantity displayed on the LCD screen is more clearly. Using the battery symbol plus percentage or the battery symbol plus voltage two display ways, so that the display is more intuitive.
The power display module can select the appropriate model according to the function and characteristics of the battery;The appearance is divided into two types: acrylic panel and shell. The front of the shell is PVC film, which has surface waterproof function.The front side with the function key can manually switch the power display percentage/voltage/off 3 gear cycle;The front two buttons are set to front, which is more convenient and efficient, and has all the functions of a single button at the same time.
Know the power model---------------------------------------------------------
Function introduction
:
-
Manual cycle power percentage/voltage/off3 manual
-
P
ower
p
ercentage/voltage is automatically cycled every 2 seconds
-
Set battery specifications and functions yourself
-
Backlight can be set on or off
-
Automatic sleep function with 10 second delay
-
Able to withstand ultra-wide voltage input
-
Press the key to turn on the liquid crystal display
(LCD)
function (some models)
-
Double discharge curve selection
Electrical performance parameters
:
About setting:
4.1The following battery specifications support self-setting:
4.2 The key definitions:
4.3 The function Introduction:
4.4 The setting procedure:
1.Disconnect the power supply of the electric quantity display module,press and hold thesetting button, release the setting button after the power supply is connected to theelectric quantity module,and display the current setting parameters of the electric quantityon the display screen;
2.Press the setting button to select the battery specification P/L/F(P=12V lead-acid,L= 3.7Vlithium battery, F= 3.2v lithium iron phosphate battery);
3.Press the function key to set the number of battery strings,press the function keys andthe setting keys to select the number of batteries in series up or down;
4.Press function key to enter advanced setting interface, use setting key to select S1-S5, confirm key to select or cancel selected mode;
5.After the setting is completed,the power is turned on again,and thepower automaticall-y saves the setting data;
For Example:10 series of lithium battery power, power percentage and voltage are autom-atically displayed in rotation after opening (S1 mode)
Operation: Disconnect the power of the display module, press and hold the setting button, and then turn on the power module. Press the setup button shortly to select L, press the function button to select 10, and press the function button to select S1.and then connectpower again.
Matters needing attention:
1, The LCD screen of the module is a glass material and it is a fragile product. Serious drop, heavy pressure, impact, etc. should be avoided;
2, The module LCD is made of wide temperature HTN material. The using environment is -10 °C ~ 50 °C. When the temperature is lower than -20°C,the LCD will become lighter. When it is used above 50°C, the color of the LCD will darken. When the temperature is restored to the normal temperature,the LCD will automatically recover.
When the environment temperature is more than 50 ℃ will shorten the service life of the LCD.
Percentage voltage comparison table:
1,The above parameters are set according to the battery discharge curve , for reference only;
2,The parameters in the table are typical battery discharge values,and the voltage para-meters are theoretical values. In practice, there may be deviation due to different loads;
3, Module maximum precision: ±2%, ±0.5% precision between each gear, special battery specifications and battery parameters can be customized according to customer require-ments;
4,Modules are upgraded without changing appearance and performance.No further notice is given.
Installation and dimensions:
7.1 Panel power size (unit mm)
7.2 Shell size (unit mm)
