JDY-25M JDY-25 Bluetooth 5.0 BLE MESH Wireless Bluetooth Module Master-slave Transparent Transmission UART 1.9-3.6V 80M Distance

Category : Electronic Components & Supplies | Active Components

USD 2.92USD 4.78

JDY-25M JDY-25 Bluetooth 5.0 BLE MESH Wireless Bluetooth Module Master-slave Transparent Transmission UART 1.9-3.6V 80M Distance

Description
Specification

Description

1. Product introduction: JDY-25M Bluetooth function supports master-slave transparent transmission, iBeacon, BLE probe, iBeacon detection, MESH network, MESH network number supports 65280 device network, adopts multi-hop wireless anti-collision technology, network communication speed supports 50mS send 12 Byte data, single module supports routing node and terminal node, routing node supports data relay (does not support low power consumption), terminal node supports low power consumption (automatic sleep after pressing the key to wake up and send data), JDY-25M network is generally Only after configuring the network NETID and short-circuit address, the module will automatically network. When the network module communicates with the APP, it is equivalent to transparent transmission, which greatly facilitates the user to develop the APP that is compatible with the old product's APP. 2. Product Features: 1: Support data transparent transmission with mobile phone (IOS, ANDROID) APP (working current is about 1mA) 2: Support module and module master-slave high-speed transparent transmission 3: Support iBeacon function (ultra low power consumption) 4: Support iBeacon probe function 5: Support BLE Bluetooth probe function 6: Support multi-connected slave mode, multi-connected slaves can be connected with multiple mobile phones, and transparent transmission at the same time 7: Support Bluetooth MESH (network serial data communication, output IO control, input button control) networking 8: MESH network sends data to support response and non-response communication 9: Network remote control 10: Multi-connected master-slave mixed connection (the master is connected to the slave at the same time, the slave is connected to the mobile phone at the same time, and works at the same time) 3. Scope of product application: 1: Bluetooth networking LED lights (one-to-many, many-to-one, mobile phone or remote control, many-to-many control) 2: Bluetooth networking serial communication application (one-to-many, many-to-one, mobile phone or remote control, many-to-many control) 3: Network panel switch, 86 switch (ultra low power consumption) 4: Networking smart home applications (switches, relays, curtains) control 5: Networking sensor applications 6: WIFI networking gateway application 7: Zigbee networking application 8: Mobile phone networking control application 9: Key Label Fourth, technical specifications: Operating voltage: 1.9–3.6V Operating temperature: -40–85°C Transmit power: +4dbm Communication distance: 80m Bluetooth version: BLE5.0 Antenna: PCB onboard antenna Antenna Gain: -3dbi Receive sensitivity: -96dbm SMT soldering temperature: <260℃ Communication interface: UART Slave and APP communication speed: 8k (byte/s) MESH communication speed: 50ms send 12byte Average current: Non-MESH mode wake-up (transparent) current: about 1mA Non-MESH mode slave has broadcast light sleep: within 200uA (related to the broadcast interval) MESH mode wake-up communication current: about 4mA MESH mode sleep current: 3uA Deep Sleep Mode: 3 uA 5. Factory default configuration: Function Parameter AT command Baud rate 9600 AT+BAUD4 Module short address 2 bytes after the MAC address Network ID 1189 AT+NETID1189 K1 target short address FFF AT+KEY1,FFF,1, 1 K2 target short address FFF AT+KEY2, FFF,2, 1 K3 target short address FFFF AT+KEY3, FFF,3, 1 K4 target short address FFFF AT+KEY4, FFF,4, 1 K5 target short address FFF AT+KEY5, FFF, 5, 1 APP connection password switch OFF AT+TYPE0 APP connection password 123456 AT+PIN123456 Broadcast name JDY-25M AT+NAMEJDY-25M Router Node 0 AT+MCLSS0 Transmit power 4 AT+POWR4 OUTPUT is not associated with INPUT 0 AT+SUBTYPE0 Learning mode off 0 AT +LEARN0

Specification

Application : Computer

Supply Voltage : standard

Keyword : BLE5.0 BLE 5.0

Operating Temperature : standard

Condition : New

Origin : Mainland China

Dissipation Power : standard

Model Number : JDY-25M JDY-25

Type : Logic ICs

JDY-25M JDY-25 Bluetooth 5.0 BLE MESH Wireless Bluetooth Module Master-slave Transparent Transmission UART 1.9-3.6V 80M Distance

Description

Specification

RELATED PRODUCTS