JDY-25M bluetooth 5.0 MESH Zigbee module BLE bluetooth BLE master-slave passthrough bluetooth MESH Quality good
JDY -25 m super bluetooth support master-slave passthrough, iBeacon, BLE probes, iBeacon detection, MESH network, MESH network largest support 65280 networking equipment, USES the jump more wireless collision technology, network communication speed support 50 ms 12 bytes of data, single module support routing nodes and terminal nodes, routing nodes support data relay (does not support low power), terminal nodes support low power (key awaken after sending the data auto sleep), JDY - 25 m good networking generally only need to configure the network NETID, short-circuit address, the module will automatically be networking, network modules communicate with APP equivalent to passthrough, such great convenience user development APP APP compatible with old products.
1: support and mobile phones (IOS, ANDROID) APP data passthrough (working current around 1 ma)
2: support master-slave high-speed passthrough module and module
3: support iBeacon function (ultra-low power consumption)
4: support iBeacon probe function
5: support BLE bluetooth probe
6: support even from the machine model, even from the machine can be connected with multiple mobile phone, at the same time passthrough
7: bluetooth MESH (network serial data communication, the output IO control, input button control) network
8: MESH network to send data to support to communicate with no answer reply
9: network remote control
More than 10: even the master-slave machine mix even (host connection from the machine at the same time, from the machine connected mobile phones at the same time, the work at the same time)
1: bluetooth network leds (one-to-many, and many-to-one, mobile phone or remote control, many-to-many control)
2: bluetooth serial communication networking applications (one-to-many, and many-to-one, mobile phone or remote control, many-to-many control)
3: network panel switch, 86 switch (ultra-low power)
4: network intelligent household applications (switch, relay, curtain) control
5: networking sensor applications
6: WIFI network gateway application
7: Zigbee networking applications
8: mobile network control application
9: the key tag
type | specification | |
Working voltage | 1.9 -3.6 V | |
Working temperature | - 40-85 °C | |
Maximum transmitted power | +4DBM | |
The communication distance | 80m | |
Bluetooth version | BLE5.0 | |
The antenna | PCB antenna | |
Antenna gain | - 3 dbi | |
Receiving sensitivity | 9 -6DBM | |
SMT soldering temperature | < 260 ℃ 260=""> | |
Communication interface | UART | |
Module size | 27 * 12.88 * 1.6 mm | |
From the machine and the APP communication speed | 8 k (byte/s) | |
MESH communication speed | 50 mshair12 byte | |
The average current | nonWake up MESH model (passthrough) current | 1 ma |
nonShallow sleep MESH model from the machine has a radio | Within 200 ua (related to broadcast interval) | |
MESH model wake current communication | 4 ma | |
Sleep current MESH mode | 3 ua | |
Deep Sleep mode | 3uA |
The sequence | function | parameter | The AT command |
1 | Baud rate | 9600 | The AT + BAUD4 |
2 | Module short address | After the MAC address2byte |
|
3 | Network ID no. | 1189 | The AT + NETID1189 |
4 | K1 short target address | FFFF | The AT + KEY1, FFFF,11, |
5 | K2 short target address | FFFF | The AT + KEY2FFFF,21, |
6 | K3 short target address | FFFF | The AT + KEY3FFFF,31, |
7 | K4 short target address | FFFF | The AT + KEY4FFFF,41, |
8 | K5 short target address | FFFF | The AT + KEY5FFFF,51, |
9 | APP connection password switch | guan | The AT +TYPE0 |
10 | APP connection password | 123456 | The AT +PIN123456 |
11 | A broadcaster | JDY -25M | The AT + NAMEJDY - 25 m |
12 | The router nodes | 0 | The AT + MCLSS0 |
13 | Transmission power | 4 | The AT + POWR4 |
14 | The OUTPUT is not associated with the INPUT | 0 | The AT + SUBTYPE0 |
15 | Learning mode off | 0 | The AT + LEARN0 |
Brand Name : SZYTF
Condition : New
Origin : Mainland China
Model Number : JDY-25M
Type : Module