1. Step on Parking Arrester (Only Manual Transmission Gear ).2. the Ignition Lock Commodity Shelf ON Location, Use Fault Diagnosis Instrument Start "Tire Pressure Sensors Learn( Tire Pressure Sensor Read )" mode If Hear Trumpet Issued Two Sound Chirps, Said Served as New Read Mode Was Implemented. Left Front Steering Signal Also Will Light.3. from Left Front Wheel Start, to Tire Pressure Monitoring Tool of Antenna in Court, withstand Close to Valve Core at Rim of Tire Side Wall. Press And Release Startup Button And Wait for Trumpet Issued Haw Sound. Once Trumpet Issued Chirps, Sensor Information Is Read, and to Be Read into the next Location of Steering Signal Light Will Light.4. trumpet Issued Ringing And Right Front Steering Lights Lit, the Remaining 3 Sensor following Order Repeat Step 3:

4.1 Right Front4.2 Right after4.3 Left Rear

5. when Left Rear Sensor Has Been Read And Trumpet Also Twice Chirr after, read Process Complete And Car Body Control Module Also Drop out Served as New Read Mode.6. the Ignition Lock Commodity Shelf OFF Location, Will All Tire Pressure Adjustment to Recommended Value. See "Vehicle Certificate, Tire Label, Anti-Theft And Maintenance Parts Identification Number Label ".

Tire Pressure Monitoring (TPM) System by Board Combination Instrument (IPC), Car Body Control Module

(BCM), 4 PCs Radio Frequency Emission Pressure Sensor And Serial Data Circuitry, execution Tire Pressure Monitoring System Read into the Pattern Feature. In Each Tire Transposition, Car Body Control Module Replacement Or Sensor Replacement after, must Execution Sensor Served as New Read Read Procedures. Once Enabled Served as New Read into the Pattern, Each Sensor Unique ID Will Be Read Car Body Control Module Memory. When Read into One Sensor Identification Code, car Body Control Module Make Trumpet Issued Chirr Instructions Sensor Have Sent Identifier And Car Body Control Module Have Arrival And Read. Car Body Control Module Must Be in the Correct Order Read Sensor Identification Code to Determine the Correct Sensor Location. Read First Identification Number Assigned to Left Front Location, the Second Allocation to Right Front Location, the Third Assigned to Right Posterior Location And Fourth Assigned to Left Rear Location. Steering Lights Will Separately Light up to Indicate Read Location of the Correct Order.

Use EL-50448 Or Equal Basis Tool to Diagnose Sensor FeatureEach Sensor Internal with One Low-frequency Coil. Tire Pressure Monitoring Used In Enable Mode, Will Generate One Start Sensor of Low-frequency Transmission Signal. Reading Mode, Sensor through Transmission Signal to Respond to Low-frequency Start. In Tire Pressure Monitor Read Mode, When Car Body Control Module Arrival to One Read into the Pattern Transmission Signal, will Sensor Identification Number Assigned to Its Read Order Symmetrical Should Vehicle Location.

Sensor Feature-Use Pressure Mastauxy/Decrease MethodIn Static Mode, Each Sensor Every 30 Seconds for a Pressure Measurement Sampling. Roogo Tire Pressure with Last Measured Value Compared Increase Or Decrease Surpass 8.3 KPa (1.2 Lbf/Square Inch ), will Immediately Served as New Measurement to Confirm Pressure Changed Value. Roogo Pressure Indeed Sound  the Changed, Sensor to Read into the Pattern Transmission. In Tire Pressure Monitor Read Mode, When Car Body Control Module Arrival to One Read into the Pattern Transmission Signal, will Sensor Identification Number Assigned to Vehicle with Read Order Symmetrical Should of Location on.

Served as New Read into the Pattern of CancelRoogo Ignition Lock Conversion to off Location, Or, in Surpass 2 Minute of Time Within Unread Any Sensor, Served as New Read into the Pattern Will Cancel. Roogo in Read First Sensor before Cancel Served as New Read into the Pattern, Original Sensor Identifier Will Be Reservations. Roogo in Read First Sensor after Cancel Served as New Read into the Pattern, Sound  the following Situation:• All Storage of Sensor Identification Code in Car Body Control Module Memory Invalid.• Driver Information Center Displays Dash Replace Tire Pressure.• Set DTCC0775.

At This Time These Situation Will Need Repeat Execution Served as New Reader, to Make System Normal Work.

Tire Pressure Monitoring Served as New ReaderNote: Roogo Use Fault Diagnosis Instrument to Enable Served as New Read into the Pattern, you Must for Tire Pressure Monitoring Tool Start Sensor. Use This Preferred Method, Others Any Wrong Sensor Signal Will Not Loudspeaker Served as New Read Procedures. Roogo One Special of Sensor Information in Start Displayed When in Only Tool on, but Trumpet Not Issued Chirps, This Situation Because Sensor Signal by Another One Parts of Barrier, simply Wheel Valve Core Rotation to Different Location.Roogo Use Driver Information Center Button Start Served as New Read into the Pattern, you Might Want to Use Tire Pressure Monitoring Tool Or Pressure Mastauxy/Decrease. In Use This Method Execution Procedures Front, Ensure Not Also Execution Others Reader, or near Non-Others Equipment Tire Pressure Monitoring System of Vehicle in the Tire Pressure Adjustment. In Traveling of Equipment Tire Pressure Monitoring of Others Vehicle May Issue Disorders Signal, thus Wrongly Read. In Execution Reader, Roogo Heard Vehicle Took Office One Trumpet Issued Chirps, probably Read the Wrong Sensor, Need Cancel the Program And Served as New Operation. In This Situation, Strong Recommend Staying Away from Others Vehicle Execution Tire Pressure Monitoring Served as New Read Procedures. Roogo Start One Specific Sensor Cannot Make Trumpet Issued Chirps, this Situation May Be Due to Sensor Signal by Another One Parts of Barrier, simply Wheel Valve Stem Rotation to Different Location.

Preferred Fault Diagnosis Instrument Served as New Read Enable Method

1. Step on Parking Arrester (Only Manual Transmission Gear ).2. the Ignition Lock Commodity Shelf ON Location, Use Fault Diagnosis Instrument Start "Tire Pressure Sensors Learn( Tire Pressure Sensor Read )" mode If Hear Trumpet Issued Two Sound Chirps, Said Served as New Read Mode Was Implemented. Left Front Steering Signal Also Will Light.3. from Left Front Wheel Start, to Tire Pressure Monitoring Tool of Antenna in Court, withstand Close to Valve Core at Rim of Tire Side Wall. Press And Release Startup Button And Wait for Trumpet Issued Haw Sound. Once Trumpet Issued Chirps, Sensor Information Is Read, and to Be Read into the next Location of Steering Signal Light Will Light.4. trumpet Issued Ringing And Right Front Steering Lights Lit, the Remaining 3 Sensor following Order Repeat Step 3:

4.1 Right Front4.2 Right after4.3 Left Rear

5. when Left Rear Sensor Has Been Read And Trumpet Also Twice Chirr after, read Process Complete And Car Body Control Module Also Drop out Served as New Read Mode.6. the Ignition Lock Commodity Shelf OFF Location, Will All Tire Pressure Adjustment to Recommended Value. See "Vehicle Certificate, Tire Label, Anti-Theft And Maintenance Parts Identification Number Label ".

Alternative of Driver Information Center Served as New Read Enable Method

1. Step on Parking Arrester (Only Manual Transmission Gear ).2. the Ignition Lock Commodity Shelf ON Location, with Driver Information Center (DIC) Display Control Start Served as New Read Mode. Trumpet Issued Two Sound Chirr Show That Served as New Read Mode Is Enabled And Will Light Left Front Steering Signal.3. from Left Front Wheel Start, to next Method Start Tire Pressure Sensor:

• Make Tire Pressure Monitoring Tool of Antenna in Court, Withstand Close to Valve Core at Rim of Tire Side Wall. Press And Release Startup Button And Wait for Trumpet Issued Haw Sound. Once Trumpet Issued Chirps, Sensor Information Is Read, and to Be Read into the next Location of Steering Signal Light Will Light.Warning: Tire Inflating It Foot Could Cause Injury Or Damage Tire And Wheel. When Increase Tire Pressure, Do Not beyond Tire Side Wall Label Maximum Charge Pressure Stress.• Mastauxy/Reduce Tire Pressure 8-10? Seconds, And Then Wait for Trumpet Issued Haw Sound. 8-10? Seconds Later, Reached Tire Pressure Mastauxy/Decrease of Time, trumpet Issued Chirr May Be Inadequate Or Continuous 30? Seconds. Once Trumpet Issued Chirps, Sensor Information Is Read, and to Be Read into the next Location of Steering Signal Light Will Light.

4. trumpet Issued Ringing And Right Front Steering Lights Lit, the Remaining 3 Sensor following Order Repeat Step 3:

4.1 Right Front4.2 Right after4.3 Left Rear

5. when Left Rear Sensor Has Been Read And Trumpet Also Twice Chirr after, read Process Complete And Car Body Control Module Also Drop out Served as New Read Mode.6. the Ignition Lock Commodity Shelf OFF Location, Will All Tire Pressure Adjustment to Recommended Value. See "Vehicle Certificate, Tire Label, Anti-Theft And Maintenance Parts Identification Number Label ".