LED digital display Scale Coffee Kitchen Scale Upgrade USB Intelligent Weighing And Timing Electronic Scale For Kitchen Baking

Description:

Product size: 117.5X132.7X33.5MM

Power supply: built-in lithium battery (compatible with all mobile phone charger interfaces: Micro USB, USB Type C, Lightning)

LED digital display (green)

Maximum weighing: 3KG Scale value: 0.1G Minimum lifting: 0.2G

Unit: g, lb/oz, ml

Function keys: 1. Switch on/off/tare off/calibrate (compound key) (TARE/ON/OFF)

UNIT/TIMER hidden touch button (touch according to the position shown in the appearance diagram, and the button will light up after power on)

Low power alarm (LO)

Specifications:

Operating Instructions：

The product has three modes of use: 1. normal mode (random mode), 2. semi-automatic mode, and 3. automatic mode.

1 Common mode: It is not necessary to operate according to the established process, and the weighing meter is operated according to the user's demand (the powder water ratio will not be displayed)

2 Semi automatic mode: the powder water ratio will be displayed, and the operation shall be carried out according to the established process, as follows:

Press the Start button to start the machine, and the 3.1.1 interface is displayed. At this time, load the coffee brewing vessel on the weighing platform, press the (TARE/ONOFF) key once, and the weight of the peeling vessel will return to zero. At this time, add coffee powder into the vessel according to personal taste (generally 8-15g). At this time, press the peeling key twice continuously, hear two "dripping" sounds, record the weight of the successful coffee powder, and then press (UNIT/TIMER) to start timing. At the same time, add water into the container to brew according to personal habits. The timing continues after the water is stopped. When the coffee pot is removed from the weighing platform, the digital screen will display the weight of the coffee solution flushing time/powder water ratio in turn. As shown below

At this time, press the power on key to return to the initial power on state. The next round of brewing can be repeated.

3 Automatic mode: It is required to operate according to the established process, and the powder water ratio will be displayed. The operation process is as follows:

Under the power on state, press the (TARE/ON/OFF) key twice in a second, and the No. 5 sign in the middle of the display screen lights up as shown in the figure

“A”。

At this time, load the brewing vessel on the weighing platform, and the weight of the vessel will be automatically peeled. Then add coffee powder to the vessel according to personal taste (generally 8-15g). At this time, you will hear "dripping" two colors, and automatically peel and clear, and record the weight of the successful coffee powder. At this time, water can be added to brew coffee. When 0.5-3G weight change is detected, the time zone starts to automatically time. After brewing, the time zone continues to time and record the braising time. When the vessel is taken away from the weighing platform, the clock zone displays the time to stop flushing the weight of the coffee solution and alternately displays the powder water ratio. As shown in the figure above (semi-automatic mode), press the power on key to return to the initial power on state. The next round of brewing can be repeated.

Package Included:

Electronic scale * 1, instruction manual * 1

Notes:

1、 The maximum weight of the electronic scale is 3KG. If it exceeds the limit, EEEE will be displayed. Do not weigh objects larger than the rated weight, or place heavy objects on the scale platform for a long time,

Otherwise, the sensor may be damaged.

2、 The main body of the electronic scale is made of PC material, the scale plate is made of stainless steel, and the anti-skid pad is made of silica gel. Do not clean the shell with corrosive detergent, and do not use it in high salt, high humidity and high temperature situations.

3、 Please use this product in the environment of 10-30 ℃. If the temperature difference is too large, it may cause measurement error. If the temperature difference is too large, please use the standard weight to calibrate the original product and then use it again. During calibration, ensure that the product is kept in the same environment for more than 30 minutes.