Please confirm your model before buying, thank you.1.For the cars of 2010 later, you can choose the V2.1 and V1.5.2.For the cars before 2010,you can choose the V1.5.3.If you can not confirm the year of your car,please choose the V1.5 Version,it is compatible for most cars.

Steps for usage:

Insert the product directly into the car OBD interface and connect to the mobile app: TORQUE(CD will not included because the damage easily ). Customers can download the software by yourself. (the software supports computers and Android phones, and does not support Apple phones).Software address www.cos8000.com

Highlights:

The newly developed wireless scan tool.It supports almost OBD-II protocols.It is the latest version 2.1 & Version 1.5Bluetooth connection, no Batteries, Cables, or Switches.Wireless (Bluetooth) 5~ 10 metersRetrieve Fault Codes (DTCs) and clear Check Engine lights.Can also be used with a PC with a Bluetooth Card.

Functions:

Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).Display current sensor data, including:1.Engine RPM2.Calculated Load Value3.Coolant Temperature4.Fuel System Status5.Vehicle SpeedV2.16.Short Term Fuel Trim7.Long Term Fuel Trim8.Intake Manifold Pressure9.Timing Advance10.Intake Air Temperature11.Air Flow Rate12.Absolute Throttle Position13.Oxygen sensor voltages/associated short term fuel trims14.Fuel System status15.Fuel Pressure

Features:

Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).Clear trouble codes and turn off the MIL (''Check Engine'' light)Set the maximum number of responses to obtainRemove spaces from ECU responses (to speed data transmission)Store a unique identifier in EEPROMSet the CAN mask and filter with one commandEasily switch between variable and fixed CAN message lengthsSend CAN remote frames (RTRs)

If it is an unsupported car model, it cannot be used; please consider carefully before placing an order！

Whether to support the use, please refer to the following protocol for more precise. Supported protocols can be found in the car manual.

Multi-Protocol Support:

1. ISO9141-2(5 baud init, 10.4Kbaud)2. ISO14230-4 KWP (5 baud init, 10.4 Kbaud)3. ISO14230-4 KWP (fast init, 10.4 Kbaud)4. ISO15765-4 CAN (11bit ID, 500 Kbaud)5. ISO15765-4 CAN (29bit ID, 500 Kbaud)6. ISO15765-4 CAN (11bit ID, 250 Kbaud)7. ISO15765-4 CAN (29bit ID, 250 Kbaud)A.SAE J1939 CAN (29bit ID, 250*Kbaud)B.USER1 CAN (11*bit ID, 125*Kbaud)C.USER2 CAN (11*bit ID, 50*kbaud)*default settings (user adjustable)

Vehicle Coverage:

For Alfa Romeo/ For Audi/ For Bentley/ For BMW/ For Cadillac/ For C-hevrolet/ For Chrysl/For C-itroen/ For Daewoo/ For F-iat/ For Ford/ For GM/ For Hod/ For Hyundai/For Isuzu/For Jaguar/ For Jeep/ For Kia/ For Lad over/ For Lexus/ For Mazda/ For Mercury/ For Mini/ For Nisan/ For Mitsubishi/ For Opel/ For Peugeot/ For Posch/ For Re .nault/ For Rover/ For Saab/ For Seat/ For Skoda/ For Toyota/ For Vauxhall/ For Volvo/ For VWCAR MODEL

For your information:

For your vehicle to be OBD II compliant it must have a 16-pin DLC (Data Link Connector) under the dash and the Vehicle Emission Control Information Label must state that the vehicle is OBD II compliant

Software Included:

Scantool_net113win (Full Version)EasyOBDII V2.2 (Free Version)OBD2Spy (Demo Version)Scan Master-ELM (Demo Version)OBDCRAZY (Demo Version)This hardware can match much other software still! But most of them are not free!Works for Windows98/ME/2000/XP/Vista & 7!This tool does not match abs and airbag system!How to connect with the Phone and Software?1.Android phone system requirement: Android 4.0-4.4 or higherANDROID2.Software Installation: After insertion of ELM327 Install APP:Install---Continuous click ''Next'' continue the next installation---Click ''Done'' Install softwareINSTALL3.Connect Bluetooth:1)Turn on the Bluetooth switch2)Find ''OBDII'' and connect it,the password is: 1234 or 00003)Enter the Torque,and set the connection way:Bluetooth,then Choose Bluetooth Device: OBDII elm327Connection Failure selfcheck on phone:It is based on bluetooth 2.0,can't support IOS (bluetooth 4.0).Viecar 4.0 supports Android and IOS.Please use Android System V4.0 to latest version, and so on.1.Car Module is not supported.2.Engine is not ignited.3.You need confirm the connection way as below.Click Menu button setting bluetooth Connection:Exit Torque,and re-run the software.Successful connection.