Features: DGP301 Glow Plug Tester provides fault detection thru LED's for a quick analysis of short circuit over current normal operation and open circuit/under currentTester allows for testing without removing glow plug from engine and powers the glow plug to test the plug in its operating stateMuch more accurate test than a cold resistance test which can miss short circuitsTester uses a current measurement to accurately determine proper operation and check for short circuitsOPERATING INSTRUCTIONSDesigned To Work On 12V ONLY ! Disconnect the busbar or leads from the glow plugs to be tested; Connect the RED battery clamp to the positive terminal of the battery, and the BLACK battery clamp to the negative terminal of the battery; Push the contact plate in the end of the test probe onto the glow plug;Terminate until the glow plug has warmed up. This might take between 3 and 20 seconds (Check manufacturers specs for exact warm-up time)Check which LED is illuminated on the control panel; NOTE: Even all 4 glow plugs are open circuit, DO NOT assume this tool is faulty. thevehicle might be still started up with all 4 glow plugs being defective. Colour:BlackMaterial:plasticPackage Contents: 1X DGP301 Car Plug TesterOnly the above package content, other products are not included.Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.