OP com V1.95 Description :

Opcom OP-Com Firmware V1.95 with PIC18F458 Chip and FTDI Chip CAN OBD2 Diagnostic Tool covers almost for all FOR Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.

Opcom OP-Com  Firmware V1.95 Highlights:

1. Language: English

2. Software Version:  V200603a

    Hardware Version: V1.95

3. OP-COM - PC based FOR Opel diagnostic tool, work on FOR Opel till year 2021

4. With PIC18F458 FT232RL Chip, work more stable

5. It can work on both Windows XP and 7 32bit now(close anti-virus program)

OPCOM Function:

1. It covers almost all FOR Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.

2. The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test.

3. The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.

4. Since FOR Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.

PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)

5. Fault codes will be shown with all available information

Full fault code text description: 1) Full status information (Present, Not present, Intermittent) 2) You can print out, save, or copy the fault codes to any other application. From the fault codes window, you can go directly to the measuring blocks window. 3) The program shows you measuring block information on many control module, you can choose anything from the list on your own. 4) The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!

You can also run output tests on many controllers: PIN6-PIN14 PIN3-PIN11 PIN1 HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps

OP COM v1.99 Package List:

1pc × OPCOM Interface

2pc × USB Cable

3pc × Software and Drivers CD  

Note:If buyer received unreadbale CD or damaged,please feel free ask me to send you download link .Do not open dispute or leave negative feedback . Thank you very much.