New optical encoder 1024 pulse/line meter meter encoder NPN collector output 5-24v
\\
\\
\\
\\
\\
\\
\\
\\
\\
\\
Full metal shell, effectively shield space radiation interference!
\ \
Professional production 1000 line (1000P/R), 1024 line (1024P/R) optical encoder, speed up to 5000, 60KHz, high quality, low price!
\\
AB two-phase incremental photoelectric rotary encoder, 1024 pulse, NPN open collector output, 5-24v
\ \
Standard with 1 meter cable
\ \
Incremental rotary encoder, two - phase AB. Through the generation of 90° phase between phase A and phase B, the positive and negative rotation direction can be recognized to complete the addition and subtraction counting pulse signal.
\\
Performance: 1000/1024/600/400/2000/2048 line
\ \
Working voltage: dc5-24v
Maximum mechanical speed 5000 RPM
\ \
The electrical response frequency is 60KHz
\\
Size:
\ \
Coder body size: 38*29mm; Axis phi 6 x 12 mm;
\ \
The off-axis platform is: high 5mm, 20mm;
\ \
The fixing hole is: M3 screw, 3 mounting holes are in round 30; Lateral line.
\\
\\
Note: the installation of the fixing hole is subject to the actual object
\\
Wiring mode: yellow =A phase, white or green =B phase, red =Vcc positive power supply, black =V0 ground,
\ \
Please connect the wires according to the above method. Another metal screen layer anti-interference.
\\
\\
Output: AB two-phase rectangular orthogonal pulse output, the output circuit of NPN type open collector output, the output type to take the internal pull-up resistor and MCU or PLC directly connected, such as 51 single-chip microcomputer or mitsubishi PLC (PLC input mode should be switch from 0 v work), note: if the encoder is not receiving devices cannot directly oscilloscope oscillographic (open collector output when no pull-up resistors, there is no voltage output) to oscillographic please add two on the AB two phase output pull-up resistance;
\\
Purpose: used to measure the rotation speed, Angle, acceleration and length of an object.
\\
Scope of use: it is suitable for intelligent control of various displacement measurement, automatic length automatic skin cutter, steel bar length cutting controller, civil height measuring scale, university students' robot for competition, etc.
\\
Features: small size, light weight, easy installation and high cost performance.
\ \
Note: the output line of phase A and phase B must not be directly connected to VCC, otherwise, the output three-stage tube will be burned
Origin : Mainland China