Lonsdor KH100 Function List:
Identify Copy
Chip Simulation
Remote Generation
Remote Frequency
Access Control Key
Chip Generation
Coil Identification
Special Function
Identify/copy/generate chip:
Multi-vendor chips supported
Especially for Toyota 8A(H) chip Our predominance
Simulate Chip:
Able to simulate 4D/46/48 chips
With built-in super sensory data collector(no interference within 1 meter when collecting data)
Generate remote/smart key:
Dedicated connector to generate remote/smart key Online update supported
Remote generation diagram
Smart key generation diagram:
Dedicated connector to generate remote key:PS2-7Pin OD3.5:
Access control/remote frequency:
One-click identify and copy IC/ID cards
Copy multi-vendor chops
Detect remote frequency bands with high accuracy
One click identify ID card,able to copy multi-vendor chps,at the back sensor area
Detect super frequency:
Detect multiple frequency brands with high accuracy
Lonsdor KH100 Identify Coil:
1.Search smart induction area
Connect remote key with remote connector, Put KH100’s antenna position. If inductive signal is identified, the device will make sounds, please check if the position is right (as shown below).
2.Detect IMMO
Connect remote key with remote connector, Put KH100’s antenna close to key
identification coil, and use key to turn ignition ON. When KH100 buzzer beeps, it means
signal is detected.
How to update Lonsdor KH100 Remote Tester:
1.Enter settings menu
2.Connect the device to network
3.Then choose [check for updates]
4.One-click for online update!
Lonsdor KH100 Registration guide:
Note: After booting the device, please connect to WIFI and enter the following process.
For New user:
1.For the first use, please prepare a common call phone or email to help complete
activation process, click OK to start.
2. Boot the device and enter registration activation process.
3. Input user name, password. Confirm password, cell phone number or email to obtain
verification code. Then input the code to submit registration.
4. Account registered successfully, it will take 5 seconds to bind the device.
5.Successful registration, enter the system.
For Registered user (who has registered Lonsdor products before):
1. For the first use, please prepare a registered call phone or email to help complete
activation process, click OK to start.
2.Boot the device and enter registration activation process.
3. Input your registered mobile number or email, password to obtain verification code.Then input the code to submit login.
4.Account login succeeded, it will take 5 seconds to bind the device.
5.Successful registration, enter the system.
In addition, users who have already registered Lonsdor’s product can directly choose
[registered user] to activate account
Lonsdor KH100+ Specifications:
Package includes: