Description

Parameter:

Lens: 1/4 5M

Aperture: 2.9

Focal length: 3.29

Field of view: 72.4 degrees

Hardware connection:

1. Flexible flat cable, 90-degree vertical connector, the one next to the HDMI port. When connecting, the contact side faces the HDMI interface.

2. Tear off the protective film on the lens before use

3. Bare board, pay attention to ESD damage, beware of static electricity!

Software use:

1. RPi firmware and raspi-config have been updated for the camera, please execute apt-get update; apt-get upgrade;

2. Select camera in raspi-config, start the camera driver in the RPi firmware, and then restart

3. Use command line programs raspivid and raspistill to operate the camera and capture video clips or images

4. The captured video clip needs to be played by mplayer

How to broadcast the camera data through live webcast:

Through the nc command (ncat-Concatenate and redirect sockets), the input data of the camera is directly redirected to the network port for output.

Note: The transparent shell needs to be assembled by yourself.