+
PLA Filament For 3D Printer Filament PLA PLUS 1KG 5 Rolls/Set 1.75MM 10 Times Toughness ABS PETG Filaments
France:20001-20999,97100-97699,98400-98899
Spain:
35000-35999,38000-38999
51000-51999
07000-07999
52000-52999
Warm tip: for the region with the above postal code, the local logistics providers in Spain and France cannot deliver goods to this region.
---
1.PLA Feature
Basic Information:
(1) Wire diameter: 1.75mm
(2) Tolerance: ±0.02MM
(3) Printing temperature: 200-230℃
(4) Bottom plate temperature: need to apply glue when not heating, and do not need to apply glue when heating 50-65 ℃
(5) Printing speed: 50-100MM/s
(6) Air bubbles: 100% zero air bubbles
(7) Length: 1.75MM(1KG)=330M
Special Features:
(1) Environmentally friendly, non-toxic and biodegradable;
(2) Bright color;
(3) Low shrinkage;
(4) High strength and rigidity
2.PLA + Feature
Basic Information:
(1) Wire diameter: 1.75MM
(2) Tolerance: ±0.02MM
(3) Printing temperature: 210-235℃
(4) Bottom plate temperature: 55-65℃
(5) Printing speed: 50-100MM/s
(6) Air bubbles: 100% zero air bubbles
(7) Length: 1.75MM(1KG)=330M
Special Features:
The toughness is 10 times higher than that of PLA on the market, the printing is smooth, and the surface of the finished product is smoother and more delicate
3.PETG Feature
Basic Information:
(1) Wire diameter: 1.75MM
(2) Tolerance: ±0.02MM
(3) Printing temperature: 220-250℃
(4) Bottom plate temperature: Glue needs to be applied when it is not heated, and glue can not be applied when heated at 75-85°C
(5) Printing speed: 50-100MM/s
(6) Air bubbles: 100% zero air bubbles
(7) Length: 1.75MM(1KG)=320M
Special Features:
1. Good toughness, good impact strength, good acid and alkali resistance, excellent toughness, weather resistance, and good adhesion.
2. Good dimensional stability and no cracks
and warping.
3. High transparency and good gloss
4.SILK Feature
Basic Information:
(1) Wire diameter: 1.75MM
(2) Tolerance: ±0.02MM
(3) Printing temperature: 200-230℃
(4) Bottom plate temperature: need to apply glue when not heating
Heating 60-80℃ without glue
(5) Printing speed: 30-60MM/s
(6) Air bubbles: 100% zero air bubbles
(7) Length: 1.75MM(1KG)=330M
Special Features:
(1) Environmentally friendly, non-toxic and biodegradable;
(2) close to the silk effect;
(3) Low shrinkage
(4) 50 times higher toughness than PLA on the market
(5) The printing is smooth, and the surface of the finished product is smoother and more delicate
5.TPU Feature
Basic Information:
(1) Wire diameter: 1.75MM
(2) Tolerance: ±0.02MM
(3) Printing temperature: 205-230℃
(4) Bottom plate temperature: no heating required
(5) Printing speed: 20-40MM/s
(6) Air bubbles: 100% zero air bubbles
(7) Length: 1.75MM(0.5KG)=165M
Special Features:
(1) Bright color, high resilience, and newly upgraded high mobility;
(2) The material is soft and has good extensibility;
(3) Good anti-aging properties
6.ABS Feature
Basic Information:
(1) Wire diameter: 1.75mm
(2) Tolerance: ±0.02MM
(3) Printing temperature: 240-270℃
(4) Bottom plate temperature: 80-120°C (better with thermal insulation cavity)
(5) Printing speed: 50-100MM/s
(6) Air bubbles: 100% zero air bubbles
(7) Length: 1.75MM(1KG)=395M
special function:
(1) It has excellent impact strength and wear resistance;
(2) The chemical resistance, dyeing property, molding processing and mechanical processing effect are good;
(3) The support is easy to peel off;
(4) Applicable to equipment with heating device on the bottom plate
Shipping
* You can check parcel tracking information through this ways:1.//www.17track.net2.http://track.4px.com3. Leave a message to us, then we will check the parcel information for you.
After Sale
*We offer a one-year warranty for electronic products , but damage caused by using non original brand filament or not following the instructions correctly is not covered by the warranty.*Please provide us with the proof of video if products have any problem after receiving the parcel within 7 days, we will offer replacement or refund after confirming the problem.
Contact Us
*If satisfied with our product, please kindly leave us a positive feedback and 5 stars.*If any questions, you may contact our customer service in 24 hours before negative feedback. We'll try our best to help you.We look forward to cooperating with you next time!
Filament Name : 3D Printer Filament PLA PLUS 1.75mm
Material : PLA
Filament Material : PLA
Size : 320 meters
Form : Solid
Brand Name : JAYO
Usage : 3D Printer , 3D Printing Pen
Model Number : PLA
Origin : Mainland China
Print Speed : 50-100mm/s
Net Weight : 1kg/roll
Application : Art , industry
Print Temp : 200-230℃
Features : Higher toughness , Smooth Printing
Shelf Life : 2 Years
Packing : Box Vacuum Packing
Length : 1.75MM(1KG)=330M
Advantage : 100% No Bubble
Diameter : 1.75mm
Quality : Quality Assurance
Tolerance : +-0.02MM
oversea warehouse : fast delivery
PLA Filament : for 3d printer
