Description

Easy To Operation:The paintless dent repair kit is suitable for any person to operate, even the girl can easily repair. Most of the dent remover can be finished in half an hour, it can save your much money and time, in addition, the auto body dent puller set can be used unlimited time.Paint Friendly: All materials of our dent remover without chemicals or other bad material. Soft rubber in dent lifter's holder bottom can prevent car paint being scratched. Glue can be removed easily and won't hurt the original paint.Widely Used: Suitable for car dents removal, door ding and hail dent repair. Work for the dents on the metal surfaces of refrigerators, washing machines and household appliances. (Tip: This tool not suitable for corners or creases)

How to use1.Clean the dent with a clean wet cloth;2.Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger thedrawing gasket is, the larger the drawing force is); 4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;8. Clean the repaired place with a clean wet cloth.